modchipcentral.com Bestselling Products

Xecuter J-R Programmer v2

Tue, 22 January 2013 18:09:47 +0000

The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.

IN STOCK!!!

Xecuter Liteon DG-16D4S - Unlocked Replacement PCB

Mon, 13 June 2011 23:46:29 +0000

Replaced by the 1.1 version: http://www.modchipcentral.com/store/product.php?productid=17811

Enables/disable write protect for Liteon DG-16D4S Drives (also 0225) DVDs. High quality, easy installation!

30AWG Wire and Solder Kit

Sat, 27 March 2010 17:55:24 +0000

Feel like saving the hassle of finding the correct wire size and solder from your local electronics store? This wire/solder kit comes with all that you need to install your modchip. We will give you the correct amount corresponding to the chip you order. The only thing else you will need is a soldering iron.

XBox Aladdin Advance XT Modchip PLUS2

Sat, 27 March 2010 17:37:24 +0000

OUT OF STOCK

XBox Aladdin Advance XT Modchip Compatible XBOX versions 1.0 to 1.6 Compatible with all Evolution-X software Aladdin XT now supports external LCD displays Simple installation Note: New updated chip XBox Aladdin Advance XT Modchip PLUS2

68nF 50V Ceramic Capacitor

Thu, 08 December 2011 06:20:54 +0000

IN STOCK

Perfect for increasing RGH boot time of Big Block Jaspers (256/512) and other problematic Phat Xbox's.

Quality ceramic coating guarantees high moisture resistance and a wide operating temperature range. Operating tolerance ± 10%.

0.068uF / 68nF Rating.

Xecuter NAND-X To CoolRunner JTAG Cable

Fri, 04 November 2011 06:04:13 +0000

Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.

Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)

IN STOCK

Xecuter Corona 4GB NAND RW Kit V4

Thu, 04 October 2012 19:43:09 +0000

A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND. Simply solder the QSB and connect the SD adapter to your computer. Features: Fast Read/Write of a Corona 4GB model NAND (aka Corona v2)

IN STOCK

Xecuter NAND-X Wires Install Kit

Wed, 28 September 2011 12:59:44 +0000

IN STOCK

This is the wires install cable for the NAND-X. Simply solder the wires to the correct points on the motherboard and plug into the NAND-X. Easy !

Maximus Kamikaze Winbond Unlock Template

Thu, 27 October 2011 19:21:18 +0000

A simple template to mark the spot for that Kamikaze UNLOCK

PS Vita 3G to microSD card adapter v2.1

Fri, 25 August 2017 13:11:43 +0000

PS Vita 3G to microSD card adapter v2.1

OUT OF STOCK

Molex External Power Supply Adapter 12V + Bonus Wall Power Cable + Molex to Sata Power Adapter

Thu, 24 February 2011 16:11:54 +0000

Comes with FREE Molex to Sata Power Adapter and Bonus Wall Power Cable

This unit is great for powering your CK3i, CK3 Pro or CK3 Lite so you do not need to plug it into your PC for power which makes it much easier!

BEWARE OF CHEAP VERSIONS OF MOLEX PSU - THEY DO NOT WORK WITH THE CK3i, CK3 PRO or CK3 LITE !

These molex power supplies have been sourced specifically to work with the Xecuter CK3i, CK3 Pro and Xecuter CK3 Lite power adapters without any problems whatsoever. There have been reports of other types of power supply blowing or only lasting a few minutes. We have tested these over several hundred hours to make sure they are the best quality possible.

Naturally as they are better quality the price is a little higher, but we have still make them great value !

We would like to remind you that we are backing these with our standard 30 day warranty so you can be sure of piece of mind when purchasing.

4 Pin Molex Connector.
In-line ferrite bead to prevent high frequency electrical noise from effecting your system.
Approved by UL, FCC, CE, PSE, N1107, GS, PES JET & All Safety certifications
4 pin Molex Adapter with 40" Power Lead
Input: 100-240VAC 50/60Hz 0.5A
Output: 12V 2.5A / 5V 2.5A

PS2 Modbo 4.0

Sat, 27 March 2010 16:08:44 +0000

Upgrade from ModBo 3.0, comes with the original 100% v1.93 firmware, but it isn't upgradeable. Software selectable "PS2 Quick Load" option. (To skip PS2 logo and Quick boot PS2 Games!!)

Maximus Vampire Rebuild Board

Fri, 26 March 2010 14:02:42 +0000

IN STOCK

This board is a rebuild board, do you remember having to wire up the traces that you cut at the beginning of the MRA method to read the Liteon Firmware? well, this board can be used to avoid doing that re-wire, while the use of this board IS NOT REQUIRED to use the Vampire, we are sure that the use of this board will simplify the full mod procedure, and it has a couple of extra features like making easy access to the probe spots for the vampire and at the end of the job you can choose route the PIN 101 to the power connector of the drive for future updates without re-open (with an upcoming tool). Simply use the rebuild board from the beginning of the installation and we are sure you will find it useful.

Cobra USB - PS3 Development Tool - FINAL SALE

Sat, 04 June 2011 13:39:51 +0000

PS3 USB Jailbreak solution from Team Cobra!

Xecuter 2.6 CE

Thu, 04 August 2011 04:37:13 +0000

Xecuter 2.6 CE - Now works with all models including the latest v1.6 models. It also comes with external switch as standard and cool blue led's. The worlds best Xbox mod chip on the market. The Xecuter 2.6 mod chip allows the user to play all import and backup games on their XBOX console. Compatible with all Xbox machines from all regions (USA, JAP, PAL) including the new v1.6b.

In stock 1 left!

E3 Flasher NOR Clip Suit

Wed, 28 December 2011 23:59:35 +0000

The E3 Flasher NOR Clip Suit is one of the most important spare part of E3 Flasher, which works with LIMITED Edition and also with the Standard Edition. This CLIP Suit includes E3 NOR Clip and E3 Linker - therefore the E3-Flasher can work in two ways: solderless installaion due to the E3 Clip or solder wire installation due to the E3 Linker.

USB Dongle Replacement for X360key / xk3y / 3k3y / 3key

Wed, 14 December 2011 01:30:20 +0000

This is a genuine OEM USB Dongle replacement for the X360key / xk3y / 3k3y / 3key (FCC Cable optional)

Xecuter Sputnik360 Liteon DG-16D4S Slim DVD Unlock Probe

Fri, 05 August 2011 12:13:14 +0000

The SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Lite-On DG-16D2S Replacement DVD Drive 74850c

Fri, 26 March 2010 14:40:19 +0000

Replacement Lite-On DG-16D2S ( pulled from a working system and tested ) firmware version 74850c, these can easily be converted to 83850c or a 94350c drive

MAX AVR USB v1.2 - Atmel 16kb

Mon, 06 September 2010 14:06:50 +0000

New Version of Maximus AVRUSB, the Maximus AVRUSB 1.2 comes with OPTIONAL Case and standard USB plug Atmel AT90USB162 version

Double Shielded Pro CPU_RST Cable PHAT or SLIM

Tue, 13 November 2012 20:47:41 +0000

Improve your RGH boot times with this professionally manufactured Double Shielded 50Ω (ohm) grounded cable for the CPU_RST point.

OUT OF STOCK

LiteOn IHAS124-B Burner Max Compatible DVD+R DL Writer

Sun, 30 October 2011 03:44:39 +0000

DISCONTINUED!

This is the EXACT MODEL and REVISION NUMBER that is required for the upcoming Burner Max firmware upgrade that everyone is asking about. The drives are stock and not upgraded in anyway. You can click the drop down list to add LT + to the drive!. The drive fits into a 5.25 Slot and is SATA and has a BLACK bezel.

A must for new XGD3 games so you can play on XBOX Live.

Xecuter Sputnik360 SPI Unlock Probe PCB add-on

Tue, 15 November 2011 10:29:45 +0000

The SPUTNIK360 SPI Unlock Probe PCB Addon has been designed so that you never have to solder/unsolder the trace cut again.

Xecuter LT Switch 1.6

Fri, 26 March 2010 14:53:07 +0000

This is the new 4 position resistor - 4th value details will be added shortly.

This is the new Xecuter LT Switch v1.6 - the latest version in the #1 selling Xecuter LT Switch range.
Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an ON/OFF Led to show correct operation when switching to 0x72 vendor mode.
Now Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

The installation is very simple and takes about 5 minutes if you have some small experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC). There is no need to remove the LT Switch after it has been installed - simply switch to normal mode and you are good to go. Even if you have to upgrade in the future - you don't have to touch the switch again !
Don't be fooled by more expensive copycat products. This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :)
The Only Liteon Solution Recommended By Team Jungle !
Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
Easy & Simple Install - Install Once & Forget
Enable / Disable Switch
Multi-R Switch (18, 20, 22 Ohms)
On/Off LED
Completely Undetectable
No Need To Uninstall
Works with ALL tools including the latest Jungle Flasher

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

PROGSKEET V1.1 Crystal Blue - NAND and NOR reader/writer

Fri, 05 August 2011 14:10:23 +0000

use the coupon code progskeet and get 50% off of shipping!

Here is some great information on using the Progkseet: http://www.ps3devwiki.com/index.php?title=Progskeet#ProgSkeet_Tutorials

If you want a solderless clip with it, we have them for sale as well!

THE PROGSKEET BAREBONE PCB
Your one and only solution to your FLASING NEEDS…
Description:
1- Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
2- Blazing fast read/write speed!
3- Beside software-side updates, you can also expect hardware updates powered by customer requests!
4- With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
5- Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
6- Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
And always remember - for accuracy and speed, choose ProgSkeet!

SOME KIND OF DEVICES SUPPORTED (only for study and backup purpuse):
XBOX360 ALL NAND SUPPORT (ALL MODELS)
PS3 ALL NAND AND NOR FLASHES SUPPORT (ALL MODELS)
WII NAND CONSOLE (ALL MODELS)
PSP NAND CONSOLE (ALL MODELS)
ANY NAND OR NOR (CAR MARKET, HANDY PHONES etc, just send us a sample of the NAND and we can add in 1 hour the support to read and write it FOR FREE!)
TRANSFER SPEED: 1MB/sec (ex. about 16 sec. to read or write a whole PS3 Slim NOR flash)

Xecuter CK3 to NAND-X Update Cable

Fri, 04 November 2011 06:02:46 +0000

Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner over USB.

Note: The CK3 Pro (Rev D) requires a 1 wire modification (Older CK3 Pro and CK3i do not require this. Not compatible with CK3 Lite)

Hard Drive Case for Xbox 360 Slim

Tue, 18 October 2011 01:03:40 +0000

When your Xbox 360 hard drive case is broken, you can change it easily with this Microsoft Xbox 360 Slim hard disk drive case. Great protection for brand new Xbox 360 Slim HDD with 250GB logo. Best replacement for your old, damaged, broken hard drive case. 100% new with high quality.

Xecuter Nand-X QSB Install Cable

Fri, 05 April 2013 19:42:36 +0000

This is the Nand-X QSB Install cable that is included in all Nand-X kits. It is the #4 cable that is noted in all of the Xecuter installation guides.

Perfect for those that have lost or damaged their original cable.

Fits the QSB of both Phat and Slim consoles.

IN STOCK

Slim 360 Unlock Kit w/Torx T8 & T10 Hex Key

Sun, 17 April 2011 23:19:52 +0000

With these tools opening your Xbox 360 Slim will be easier than ever.

Long FCC Cable for X360key /xk3y

Fri, 08 June 2012 18:38:52 +0000

This is for the long 40cm FCC cable for the X360key that goes from the X360key to the USB dongle. USB dongle is not included.

BenQ 0800 V3 Enabled DVD Drive

Sat, 27 March 2010 16:23:55 +0000

IN STOCK

The 0800 Release is a firmware replacement for the BenQ VAD6038 drive to allow you to backup your own games. This is to be installed in your PC so you can rip Xbox 360 games from it. No more trying to find a Kreon drive!

This is the newest 0800 firmware that allows you to rip XGD3 games!

Xecuter CoolRunner CPU RESET Cleaner

Wed, 31 October 2012 20:01:24 +0000

Using input and R&D from their experienced forum members, wehave designed this very nice addon board which improves the signal quality of the CPU_RST line. This addon allows the user to easily select resistor Combos of 1K, 2K and 3.3K, and capacitor combos of 470pF, 560pF and 680pF. These are all of the values that gave the very best performance results (many users reported not being able to glitch at all, to a glitch time of 10 seconds!) . Moreover, the addon can be used on all Xilink CoolRunners and all other Xilink Boards on both Phat and Slim version installs.

AVRKey USB Version - FINAL SALE ITEM

Mon, 13 September 2010 15:57:43 +0000

With no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price.
AVRKey USB Dev Kit, start to develop on the Atmel Family of products!

Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!

Also some useful AVR USB Development Websites:

* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com

* Atmel FLIP Software Drivers - CLICK HERE

* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.

Injectus JTAG Programmer - NOW PROGSKEET PROGRAMMER V1.0

Mon, 22 August 2011 23:53:25 +0000

The ProgSkeet JTAG Injectus USB Programmer from the Infectus Team is the most advanced programmer for every ProgSkeet NAND / NOR / EEPROM USB Programmer or the ARGON and INFECTUS ModChip. It supports USB 2.0 and with the high professional programmer software can you easy reflash your ProgSkeet V1.0 and V1.1 or the ARGON chip. The ProgSkeet JTAG Injectus USB Programmer is the perfect complement for every ProgSkeet Developer!

IN STOCK

Xecuter X360 USB Pro Case

Tue, 29 March 2011 02:15:45 +0000

IN STOCK

This is for customers who ordered a caseless X360USB Pro from us previously and now want the case for it.

Xecuter USB to MOLEX 5V Power Cable

Mon, 12 December 2011 17:32:56 +0000

New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?

This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.

You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.

E3 PS3 SLIM Power Switch

Wed, 08 December 2010 14:07:44 +0000

NOT IN STOCK

These are also included in the E3 Flasher Ltd. Edition complete kits.

Great on/off switch for slim PS3 consoles.

Matrix Glitcher V1

Thu, 07 April 2016 13:19:22 +0000

Based on the GliGli Hack (a Reset type Glitch Hack), it works by sending precisely timed pulses to the console’s processor until the booting of unsigned code is successful. Once this has been achieved, XeLL, the Xenon Linux Loader is booted.

It works on Phat versions of the X360
(except Xenon motherboard) regardless of the Kernel version

Great for Glitching Phat consoles! Get the JRP V2 to program the Glitcher!

IN STOCK!

Matrix SPI NAND Flasher/ Programmer V1.0

Sun, 18 September 2011 00:48:02 +0000

Cost effective NAND reader / programmer to complete the GliGli Hack.

It features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX360 models.

PSTwo/PS2 Magic Switch v4 w/ Swap Magic Plus v3.8 Coder CD/DVD

Fri, 09 November 2012 17:21:54 +0000

Swap Magic is a great alternative to MOD chips. You can now play imported PS2 games on the Slim PS2 system without installing a mod-chip.

Magic Switch Pro V4 is designed for use with Swap Magic discs V3 on the PS2 SCPH-7000X and PS2 SCPH-9000X. Installation for the Magic Swtich Pro V4 is easy and simple.

Xecuter Sonus 360 - Speaker Upgrade Kit

Fri, 28 September 2012 19:41:29 +0000

The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!

IN STOCK

VIA VT6421A PCI Sata Card

Fri, 26 March 2010 14:31:16 +0000

PCI Sata controller. - Chipset VT6421A - 2x SATA and IDE ports! (Some have E-SATA some don'T, but E-ATA can not be used for reading the console drive)

Xecuter CoolRunner QSB V3 Monitor / Comms USB Cable

Wed, 12 December 2012 17:42:39 +0000

These are the cables used in conjunction with the v3 QSB’s to grab the CPU key into J-Runner.

E3 ODE PRO v1.2 for PS3 SLIM 2K5 / 3K / 4K

Wed, 02 October 2013 15:28:03 +0000

E3 ODE PRO v1.2 is the latest Optical Drive Emulator for PS3 SLIM 2K5 and up! Run your video games and movie ISO's from your PS3 SLIM console without the need for CFW!

Xecuter CoolRunner Xilinx LPT JTAG Cable

Fri, 04 November 2011 06:00:04 +0000

This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)

Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.

Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.

Wii Drive Replacement Boards (PCB) - DMS/D2A/D2B/D2C

Sat, 27 March 2010 16:59:53 +0000

These replacement Wii boards can be used in any console (except for D4 drives) with any region. This is a great replacement if you have a D3-2 drive and want to play backups from DVD's.

PROGSKEET Adaptor PCB Kit

Fri, 25 November 2011 17:10:57 +0000

Adaptor board to connect to progskeet one or two NAND CLIP SOLDERLESS.

It is necessary for PROGSKEET ACTEL FIRMWARE SOLDERLESS. Injectus is necessary for the re-programming of ACTEL (13/10/2011)

Contents:

1x Adaptor PCB
1x 50 pin FCC 8 cm cable
2x 32 pin FCC 20 cm cables

Xecuter CK3 XT Molex Adapter

Mon, 28 March 2011 22:31:53 +0000

Tired of having your PC Case open so you can connect your Molex Power & Sata cables to your CK3 (Connectivity Kit 3) ? This is a very useful adapter to keep all your CK3 power and sata cables neat and tidy.

Simply connect to on of your spare PC case slots and connect internally to a SATA port and to a Molex power supply.

External Molex power cable included.

Xecuter XBox 360 RROD Repair Kit - Extreme Edition

Mon, 04 June 2012 14:17:29 +0000

The XECUTER XBOX REPAIR KIT – EXTREME EDITION includes all tools needed to perform the best at-home DIY repair to your Xbox 360 without having to ship it off for an expensive reball. This fix has become the defacto solution in repairing the majority of the RROD (red Ring Of Death) Xbox 360’s.

X360key / xKey Install Service

Wed, 28 September 2011 12:01:03 +0000

Installation service for xk3y ODE on your XBox 360 PHAT or SLIM! Neat, professional service from your favourite North American distributor and service provider!

Note: USA service for our USA customers!

Canadian/international service Located in Canada Ontario!

Please email us for shipping instructions once your order is placed. Sales@modchipcentral.com