modchipcentral.com Latest Products

Xecuter CoolRunner SLIM BUNDLE

Fri, 13 January 2012 19:49:16 -0500

IN STOCK

XECUTER COOLRUNNER SLIM BUNDLE - SAVE $$

Includes everything you need to glitch your 360 Phat model (you will require a tool to read/write your NAND such as the Xecuter NAND-X)

OVER $40 VALUE !

Kit Includes:

XECUTER COOLRUNNER REV B
XECUTER COOLRUNNER SLIM QSB KIT
XECUTER XILINX LPT UPDATE CABLE
CK3 to COOLRUNNER POWER CABLE (FOR LPT PROGRAMMING)

Note: The RGH (Reset Glitch Hack) does not work with Slim Corona motherboards. Click here for instructions on how to easily identify which motherboard you have.

These devices are designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity

Xecuter CoolRunner PHAT BUNDLE

Fri, 13 January 2012 19:46:14 -0500

IN STOCK

XECUTER COOLRUNNER PHAT BUNDLE - SAVE $$

Includes everything you need to glitch your 360 Phat model (you will require a tool to read/write your NAND such as the Xecuter NAND-X)

OVER $40 VALUE !

Kit Includes:

XECUTER COOLRUNNER REV B
XECUTER COOLRUNNER PHAT QSB KIT
XECUTER XILINX LPT UPDATE CABLE
CK3 to COOLRUNNER POWER CABLE (FOR LPT PROGRAMMING)

Note: The RGH (Reset Glitch Hack) does not work with Xenon motherboards. Click here for instructions on how to easily identify which motherboard you have.

Xecuter CoolRunner - New Rev B Version

Wed, 04 January 2012 19:06:22 -0500

IN STOCK - Comes with FREE 68nf ceramic capacitor for the problematic Jaspers!

The highest quality reset glitch mod at the lowest price - accept no imitations !

World famous XBOX hardware developers Team Xecuter are happy to introduce the Xecuter CoolRunner - The Ultimate Reset Glitch Mod !

In early September 2011, Xbox scene homebrew gurus Tiros and GliGli announced that there was finally a way to boot unsigned (homebrew) code on Xbox Phat & Slim models regardless of which kernel was installed ! (before now JTAG'ing a console for homebrew was limited to very old versions of console/kernel and thus made them very difficult and expensive to buy)

Naturally a whole range of third party devices have come onto the market which were basically copies of the DIY design that was released by Tiros and GliGli. As usual the whole scene looked to Team Xecuter to see what design they could come up with to make this the most rock solid mod possible and they have done it again with the Xecuter CoolRunner !

The possibilities for homebrew on the Xbox 360 are endless. There have been hundreds of extra features since JTAG'ing became possible. Pme of the first things you can do with this is recover your DVD key from your console if it was ever lost in the paste. There are thousands of consoles out there that are gathering dust beciase of this - and this will solve all of those problems :)

FEATURES:

Works with both Phat and Slim in one device
Unique design - do not confuse with other brands that have copied the public schematics
Optimized timing for each motherboard version
Compatible with all Xbox kernel versions
Easy programming via JTAG
Power LED
Reset Cycle LED
Easy Install (7 Wires Slim, 6 Wires Phat)
Powered by CK3 Lite, CK3 Pro or CK3i for JTAG Programming
Includes a free 68nF Cap for problem Jaspers.
Works perfectly with the world famous Xecuter NAND-X
QSB Add-on available that connects to both the CoolRunner and the NAND-X (Sold Seperatly)
Trusted Xecuter Design & Warranty

*Not available for the old Xenon motherboards.

Xecuter Nand-X and Coolrunner Pin Header Cable Set

Tue, 03 January 2012 08:05:01 -0500

IN STOCK

The Xecuter Nand-X and Coolrunner Pin Header Cable Set is a perfect solution for pin header fans and a great alternative to the QSB's

Easy to fit, long lasting and durable.

1 cable fits both Phat and Slim consoles.

E3 Nor Flasher - Downgrader

Wed, 28 December 2011 19:09:01 -0500

IN STOCK

- Designed to help you programme NAND and NOR flash data
- The simplest way to help you get all function with one key operation without any PC
software
- Easy upgradable from TF card and PC USB
- No need connect to PC to save data on E3 flasher or TF card in few min with 16M Nor flash
memory on board
- Specifically designed for PS3 and allows user install and operation easier, and even get
more function like dual boot
- Compatible with host version CECH-2500 or below
- Package includes:
- 1 x Mainboard
- 1 x Cover board
- 1 x Clip with softboard
- 1 x Metal cover

E3 Flasher NOR Clip Suit

Wed, 28 December 2011 18:59:35 -0500

IN STOCK

The E3 Flasher NOR Clip Suit is one of the most important spare part of E3 Flasher, which works with LIMITED Edition and also with the Standard Edition. This CLIP Suit includes E3 NOR Clip and E3 Linker - therefore the E3-Flasher can work in two ways: solderless installaion due to the E3 Clip or solder wire installation due to the E3 Linker.

Features:		Works with the Limited and also with the Standard E3 Flasher Edition.
		Solderless installation with the E3 NOR Clip
		Wire / solder installation with the E3 Linker

Compatibility:		The E3 Flasher NOR Clip Suit is compatible with the Limited and also with the Standard E3 Flasher Edition!

R4i Save Dongle

Wed, 28 December 2011 18:48:31 -0500

IN STOCK

Save Dongle

* Fully support 3DS,NDSi,NDSL original game cartridges.

Backup saved game data
* Backup your game saves from 3DS/NDSi/NDS/DS original game cartridge to PC:
a) avoid your game saved from being accidentally overwrite or erased!
b) avoid data corrupt issues because when the flash cartridge memory has hit its limit on read/write cycles.
c) avoid losing your save game data because the cartridge battery has finally died off.

Restore saved game data
* Restore game savers backup from PC to 3DS/NDS/NDSI original game cart through PC USB.

Cheat:
* Editing game savers(level, experience, money etc ...) becomes possible. * Allow game savers to be share between users.
a. User can share or download game savers from official web site and forums.
b. Game savers sharing allow user jump to certain game level.

Upgradeable
* Upgradeable dongle firmware through USB for support new games and new features.

Functionality
* User friendly Windows PC software interface to manage the save file.
* Just plug your original cartridge into the Save Dongle and with the PC software restore/backup/edit your save game data!

Xecuter POST QSB For Xbox 360 Slim

Thu, 22 December 2011 01:37:10 -0500

IN STOCK

Xecuter POST QSB For Xbox 360 Slim.

Those that have fitted a CoolRunner to an Xbox Slim will be no stranger to the fact that it can take a great deal of trial and error to get the optimized boot times down to less than 5 seconds.

The main issue is the CPU_RST wire which has to be up to 50cm long and then coiled underneath the motherboard. In many cases the positioning of the coil is a factor due to signal interference. Then you have to try different lengths, 40cm,

Xecuter has developed a simple yet elegant solution for this problem.

Using the process of serpentining, Xecuter has designed a QSB PCB for the Xbox 360 slim that fits neatly into place, giving you an optimized solution enabling you to select several different lengths without having to cut any wires and eliminates any guess work and possible signal interference issues.

Simply cut the blue CPU_RST wire to 8cm and then you can select from 50cm, 47cm, 41cm, 38cn, 35cm, 32cm & 29cm.

Xecuter has also included all the POST points for the developers out there who wish to use that part of NANDPRO 3 that was implemented by Tiros.

Xecuter CK3 Mini

Thu, 22 December 2011 01:34:51 -0500

IN STOCK

The Xecuter CK3 Mini is the new replacement for the famous and best selling CK3 Lite and is aimed at the budget modder who needs a stable connectivity kit for his 360 DVD Drive, but doesn't require all the bells and whistles that the CK3i provides. In short it gives you the bare essentials to get cooking.

The full kit includes the 360 DVD Power Cable, Power LED, PPTC Protection Fuses, Eject Button & On/OFF Power Switch for Vendor Mode etc - complete in a superbly designed case - the thing is TINY !

To make the design even smaller Xecuter has changed the molex connector to a 4 pin 'Floppy Drive' connector and have included an easy to fit 4 pin to molex adapter cable :)

As an extra bonus Xecuter have also included a USB to MOLEX 5V Power Cable. if you need quick power on the move and don't have a MOLEX PSU - then use this simple cable to power your CK3 Mini. You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great bonus cable that has $4.95 Value !

Powers all 360 DVD Drives
Compatible with all models
Compact and Portable Connectivity Kit
New replacement to the CK3 Lite
PPTC Protection Fuses
Power ON / OFF Switch
Eject Switch
Power LED
New 4 Pin Power Connector
Includes bonus USB to MOLEX 5V Power Cable ($3.95 Value)

Xbox 360 Console 250GB Holiday Kinect Bundle - Premodified with X360key / xk3y

Thu, 15 December 2011 21:24:42 -0500

This is for a brand new Xbox 360 Console 250GB Holiday Kinect Bundle console (includes a digital code for Carnival Games: Monkey See Monkey Do (requires broadband internet connection to redeem) and Kinect Adventures) - that has just been opened up to install the X360key /xk3y

It will come with all cables and accessories and remote just like a new console normally would.

The X360key will be fully installed, ready to go. The dashboard on the console is the latest 14699 dashboard and the firmware on the X360key is the latest 1.11 firmware.

Shipping will be via Expresspost 3-4 days on average so the UPS options listed are not available for this. As well, the free shipping option is not available on this item.

Xbox 360 320GB Limited Edition Gears of War 3 Bundle - Premodified with X360key / xk3y

Thu, 15 December 2011 21:17:52 -0500

This is for a brand new Xbox 360 320gb Limited Edition Gears of War 3 Bundle console that has just been opened up to install the X360key /xk3y

It will come with all cables and accessories and remote just like a new console normally would.

The X360key will be fully installed, ready to go. The dashboard on the console is the latest 14699 dashboard and the firmware on the X360key is the latest 1.11 firmware.

Shipping will be via Expresspost 3-4 days on average so the UPS options listed are not available for this. As well, the free shipping option is not available on this item.

Xbox 360 250GB Holiday Bundle with Fable III and Halo: Reach - Premodified with X360key / xk3y

Thu, 15 December 2011 20:52:25 -0500

This is for a brand new Xbox 360 250GB Holiday Bundle with Fable III and Halo: Reach console that has just been opened up to install the X360key /xk3y

It will come with all cables and accessories and remote just like a new console normally would.

The X360key will be fully installed, ready to go. The dashboard on the console is the latest 14699 dashboard and the firmware on the X360key is the latest 1.11 firmware.

Shipping will be via Expresspost 3-4 days on average so the UPS options listed are not available for this. As well, the free shipping option is not available on this item.

Xbox 360 4GB Console Premodified with X360key / xk3y

Thu, 15 December 2011 14:15:42 -0500

IN STOCK

This is for a brand new Xbox 360 4GB Console that has just been opened up to install the X360key /xk3y

It will come with all cables and accessories and remote just like a new console normally would.

The X360key will be fully installed, ready to go. The dashboard on the console is the latest 14699 dashboard and the firmware on the X360key is the latest 1.11 firmware.

Shipping will be via Expresspost 3-4 days on average so the UPS options listed are not available for this. As well, free shipping is not available on this item.

USB Dongle Replacement for X360key/xk3y

Tue, 13 December 2011 20:30:20 -0500

IN STOCK

This is a genuine OEM USB Dongle replacement for the X360key/xk3y. (FCC Cable not included)

X360key / xk3y Replacement Remote - LCD Screen

Tue, 13 December 2011 20:27:09 -0500

IN STOCK

This is a genuine OEM Remote/LCD Screen replacement for the X360key/xk3y.

Xecuter USB to MOLEX 5V Power Cable

Mon, 12 December 2011 12:32:56 -0500

IN STOCK

New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?

This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.

You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.

68nF 50V Ceramic Capacitor

Thu, 08 December 2011 01:20:54 -0500

IN STOCK

Perfect for increasing RGH boot time of Big Block Jaspers (256/512) and other problematic Phat Xbox's.

Quality ceramic coating guarantees high moisture resistance and a wide operating temperature range. Operating tolerance ± 10%.

0.068uF / 68nF Rating.

360-CLIP for NOR 56PIN FLASH

Mon, 05 December 2011 20:00:00 -0500

IN STOCK

What comes with the 360-NOR-clip 50pin retail packing:

360-NOR-clip 50pin x1
50pin FPC x2
Testing pin-out PCB x1

Please keep in mind these clips are almost a 1 time install. When you keep taking the clip on and off, the pins don't spring back out all the way on the bottom of the clip so make sure the clip is perfectly flush with the board before you press it on.

ADAPTOR PCB PROGSKEET

Fri, 25 November 2011 12:10:57 -0500

IN STOCK

ProgSkeet adaptor PCB is necessary to connect SOLDERLESS NAND SOCKETS and NAND PCB.
This small PCB is an adaptor with 1 x 50 PIN ZIF socket and 2 x 32 PIN ZIF sockets.

The kit include a 5 cm - 50 pin flat cable to connect the ADAPTOR PCB to PROGSKEET.

Sputnik360 Liteon DG16-D4S Slim DVD Unlock Switch

Tue, 22 November 2011 18:55:40 -0500

IN STOCK

The SPUTNIK360 is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Yet another simple and useful device from Team Xecuter.

Enable write mode on Liteon DG-16D4S (MXIC) DVD Drives
Easily repair your Xbox 360 S Console
No lengthy Microsoft warranty repair delays
Easy to install quick solder PCB - takes minutes !
3 simple solder points
1 easy trace cut
Multiple Resistor options to ensure compatibility
Works on all MXIC SPI's (9504, 0272, 0225 & 0401)
Tested with firmware tools such as JungleFlasher

True Blue Dongle

Tue, 22 November 2011 18:52:52 -0500

IN STOCK

Unlock the true potential of your PS3 with True Blue – keep your PS3 on a homebrew enabled custom firmware, open up your console to a new generation of homebrew applications.

It can be used for software development and with open source, free software like FTP sever, backup manager, media player and other homebrew applications. The True Blue (aka PS Jailbreak 2) is Fully Plug and Play, updatable USB Chipset. The True Blue dongle is shipped empty, without any sofware. True Blue features:

Booting of games designed for PS3 system software v3.6 and above

Runs your existing games and new v3.6+ games from HDD in conjunction with standard backup managers

Does not require the power/eject trick

Custom v3.55 Dongle firmware behaves like OFW when True Blue is not inserted

Manufactured from highest grade components and Actel based

Durable and high quality metal case design

Tough and durable plastic packaging

Further features to be added as they are developed

On board 2 MBytes SPI flash

Supports Fat and Slim PS3 consoles currently running any firmware up to v3.55 and any PS3 which can be downgraded successfully from v3.6+ to v3.55 (NOTE: requires other tools, True Blue cannot downgrade a console)

Supports all regions of consoles

Supports all regions of v3.6+ games

Rock solid crystal oscillator on board for flawless timing

High quality, solid build

Samsung MS28 Replacement Xbox 360 DVD Drive

Mon, 21 November 2011 01:08:53 -0500

IN STOCK

A new replacement DVD-ROM drive for Xbox 360 by Toshiba-Samsung, model MS28. As Microsoft Xbox 360 requires a key from your board for the drive to work, you will have to flash the drive with this key for it to function.

Unlocked Replacement DG-16D4S PCB Matrix Freedom

Sat, 19 November 2011 12:52:00 -0500

IN STOCK

Fits all Liteon DG-16D4S Drives

Includes:
Matrix Freedom Board
External Programmer
FFC Cable
Thermal Pads

- Solderless Install
- Fully compatible with 9504, 0272, 0225, 0401 and 1071 fw revisions
- Supplied with external programmer to enable/disable write protect and reflash firmware. No need to open again the DVD or the Xbox360 once
installed.
- An easy and simple swap out system for the original DVD board.
- Easily programmable using any SATA programming tool.
- Fully compatible with Jungleflasher software and Maximus Lizard

User Manual

Sputnik 360 SPI Unlock Probe PCB add-on

Tue, 15 November 2011 05:29:45 -0500

IN STOCK

You never have to solder/unsolder the trace cut again!
At the moment when using a Sputnik Probe you have to repair the trace when you have finished programming, and if you ever need to flash the drive again you would have to de-solder.

This simple PCB addon enables you to solder the board once and then thats all you will ever need to do. The simple switch will open / close the circuit and there is an extra large pad to use when probing for when you need to unlock the SPI.

- Open / Close trace cut without further soldering
- Large pad for easy probing
- Easy to install - takes minutes !

CoolRunner Phat QSB Install Kit

Fri, 04 November 2011 02:07:02 -0400

IN STOCK

Improve the performance and ease of install for your CoolRunner and NAND-X to a Phat motherboard with this easy to install QSB (Quick Solder Board).

Includes the J1D2 and J2B1 Quick Solder Boards for NAND-X & CoolRunner Installs. Perfect for those that do multiple installs and want a nice permanent solution for their customer.

NAND-X To CoolRunner JTAG Cable

Fri, 04 November 2011 02:04:13 -0400

IN STOCK

Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.

Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)

Xecuter CK3 to NAND-X Update Cable

Fri, 04 November 2011 02:02:46 -0400

IN STOCK

Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner over USB.

Note: The CK3 Pro (Rev D) requires a 1 wire modification (Older CK3 Pro and CK3i do not require this. Not compatible with CK3 Lite)

USB to NAND-X Update Cable

Fri, 04 November 2011 02:01:13 -0400

IN STOCK

A new cable that gives you the ability to program your NAND-X via USB without the need for an Xecuter CK3 Pro or CK3i

Xilinx LPT JTAG Cable

Fri, 04 November 2011 02:00:04 -0400

IN STOCK

This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)

Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.

Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.

Scorpion Grabber 2nd Gen Cable

Thu, 03 November 2011 02:56:58 -0400

IN STOCK

This is a spare 2nd gen Cable for scorpion 2

Maximus Scorpion 2

Thu, 03 November 2011 02:54:54 -0400

IN STOCK

Maximus Scorpion 2 with Grabber cable - This is being sold separately for those who want JF 1.79 support. This item is already included with a lizard order, you do not need to purchase separately if you are ordering a Maximus Lizard, unless you are purchasing additional scorpions.

WiFi Dongle for Xk3y / X360key

Thu, 03 November 2011 01:12:26 -0400

IN STOCK

xk3y WiFi is a wireless B/G/N USB dongle that unlocks the full potential of the powerful Xk3y Linux system. The xk3y web interface provides seamless integration with any device with a browser and WiFi, such as iOS and Android smartphones and tables, PCs, and more.

The xk3y WiFi comes with a default web interface but it also opens up access to the xk3y API, making it possible to create homebrew apps for controlling xk3y! This is where xk3y WiFi will really flourish.

LiteOn IHAS124-B Burner Max Compatible DVD+R DL Writer

Sat, 29 October 2011 23:44:39 -0400

IN STOCK - these will come preflashed to the Burner Max Firmware

We have secured a good amount of stock of the Liteon IHAS124-B Burner Max Compatible DVD+R DL Writer to make sure that the price stays low for everyone - because as soon as word gets out which one to buy, they will sell out fast and/or the price will inevitably double.

This is the EXACT MODEL and REVISION NUMBER that is required for the upcoming Burner Max firmware upgrade that everyone is asking about. The drive fits into a 5.25 Slot and is SATA and has a BLACK bezel.

It can also be made into an external drive by using an external USB to SATA enclosure kit.

The drive can also burn DVD-R / DVD-RW / DVD+RW / CD-R / CD-RW formats also. The drive can be upgraded using an X360USB PRO or compatible SATA card.

Product Overview
Lite-On 24x internal DVD writers offer the fastest DVD recording speed among other similar devices. With these Lite-On DVD writer users can create and share their home videos, back-up critical information, create digital photo albums, watch DVD movies and so much more. Versatility is the key! The fully featured Lite-On iHAS324 drive comes with the latest optical storage technologies.

24x powered by SmartWrite
SmartWrite can overspeed certain 16X DVD±R media to a maximum of 24x. With 24X DVD±R writing speeds, Lite-On offers the fastest DVD±R writing possible. Always burn with the highest speed and best quality. SmartWrite optimizes the writing strategy for each particular session and automatically memorizes this for future sessions

Super AllWrite
Super AllWrite is the compatibility standard from Lite-On to offer the ability to read, write and re-write to any disc format on the market. Use your DVD writer for any purpose with the media you desire (including CD-R, CD±RW, DVD±R, DVD±RW, DVD±R DL, DVD-RAM format discs). Purchase your media without hassle; you no longer have to worry about compatibility

Serial ATA (SATA) connectivity
Higher transfer rates with SATA connection (compared to PATA). Future proof; compatibility with the latest motherboards. Better airflow in PC casings due to smaller cable and plug sizes. SATA supports “hot swap” (must be supported by your motherboard)

General Details

Model: IHAS124-B Model
Enclosure: Internal
Bezel Colour: Black
Features: N/A
Buffer: 2MB
Interface: SATA
Package: OEM

Read Speeds
DVD: 16x
CD: 48x

Write Speeds
DVD-R: 24x
DVD-R DL: 12x
DVD-RW: 6x
DVD-RAM: 12x
DVD+R: 24x
DVD+R DL: 12x
DVD+RW: 8x
CD-R: 48x
CD-RW: 48x

Access Times
DVD-ROM: 160ms
CD-ROM: 140ms

Kamikaze Winbond Template

Thu, 27 October 2011 15:21:18 -0400

IN STOCK

A simple template to mark the spot for that Kamikaze UNLOCK

Includes:
Template
1mm Drill bit (To mark starting point)
Drill bit handle

CoolRunner Slim QSB Install Kit

Sun, 23 October 2011 05:18:30 -0400

IN STOCK

Improve the performance and ease of install for your CoolRunner and NAND-X to a Slim motherboard with this easy to install QSB (Quick Solder Board)

Perfect for those that do multiple installs and want a nice permanent solution for their customer.

Xecuter CK3i

Sat, 22 October 2011 01:43:26 -0400

IN STOCK

Team Xecuter developed the first ever Xbox 360 connectivity kit back in 2006 and although it's success has been imitated it has never been bettered. We now present the first of the latest upcoming upgrades to the world famous CK3 product range.

We present to you the successor the CK3 Pro - the all new Xecuter CK3i.

The last few months have seen many changes to how a 360 DVD Drive is powered and manipulated in order to read/write its DVD key and firmware. So much so that it was time for a complete overhaul of how the CK3 worked and to bring it right up to date in order to be ready for whatever 2011/12 had in store.

Now we have tools such as the Xecuter CK3 Probe 3, it has become clear that RS232 serial is no longer required to extract the drive key. We have also taken all of the technology that had been built into the CK3-CP and embedded all of that into the new CK3i and thanks to our partnership with Jungle Flasher we have been able to completely embed all of the automated functions so that working with 360 DVD Drives is now easier than ever before.

The layout of the entire circuit has also been completely redesigned using the same high end facility that produces the uber successful X360USB PRO and is now more reliable, safer to use and with even more protections in place to safeguard against any errors.

You will also be happy to know that the Xecuter CK3i is released complete with its slick designed case to give extra protection and to give it a quality design that is not just on the inside but on the outside too.

Feature List:

100% Compatible with all XBOX 360 DVD drive models both Phat and Slim.
100% Compatible with all flashing tools inc Jungle Flasher
JungleFlasher Controlled Power ON/OFF/CYCLE
Manual Controlled Power ON/OFF/CYCLE
JungleFlasher Controlled Eject Open/Close/Half Tray
Manual Controlled Eject Open/Close/Half Tray
JungleFlasher Controlled ModeB
Manual Controlled ModeB
Self-Resetting PPTC Fuses to prevent damage if you plug in the power cable incorrectly
Extra power filters for a cleaner, safer design
Auto/Manual Mode LED's
Power On/Off LED
ModeB On/Off LED
Includes USB Cable
Custom Designed Case
High Build Quality
Trusted Xecuter Design

Requirements:

Windows PC (XP/VISTA/7 32 Bit)
Compatible SATA (Recommend X360USB PRO)
Latest Jungle Flasher Software
Good Quality Molex Power Supply
Liteon DG-16D2S Key Extraction Requires a CK3 Probe 3
USB Port
Windows Drivers Download: Click Here

Xilinx Parallel Programmer (for Matrix Glitcher and other CPLD's)

Thu, 20 October 2011 00:02:35 -0400

Xilinx Parallel Programmer based on the popular Cable III with red and green indicators.

This programmer is an affordable and great way to program your Xilinx chips.

Start programming the Xilinx line of products including CPLD's and FPGA's!

Simply plug the programmer into your parallel port on your PC, an the other end to your Xilinx chip.

PS2 / PStwo Slim USB Extreme ModChip CD - USBExtreme - NTSC Version

Wed, 19 October 2011 04:33:42 -0400

IN STOCK

Overview

USBeXtreme allows you to convert your PS2 games to USB harddisk and run directly from the USB harddisk connected to your console.

Features

Excellent Compatibility. USBeXtreme can be compatible with ALL PS2 Console.
User Friendly Graphical Interface.
Support 40Gb to 2,000Gb harddisk.
Supports All Versions of PS2.
No Modification made to your PS2 Console.
Will not void your PS2 Warranty.
USB Plug & Play.

Screenshot

What Inside the Bag

USBeXtreme Disc (x1)
User Manual (x1)

HDAdvance 3.0 NTSC w/ DVD-9 Support

Wed, 19 October 2011 04:31:13 -0400

IN STOCK

What is HDAdvance?

Overview

HDAdvance allows you to convert your PS2 games to harddisk and run directly from the harddisk connected to your console (PS2 Network adapter and compatible harddisk required). The HDAdvance package includes a CD and a DVD: The CD version embedded with the largest TOC. It can convert all CD games. The DVD version also embedded with the largest TOC. It can convert all DVD games.

Features

Support DVD-9 disc.
DVD-9 cannot be converted in the previous version. But, now with the aid of HDAdvance 3.0, you can convert DVD-9 games to PS2 harddisk easily.

No More Loading
Actually, PS2 can read data from a harddisk much faster than it can read from a CD or DVD. By using HDAdvance, you can run your PS2 games from the harddisk directly and reduce the game loading times sharply. You can say goodbye to those boring game loading screen!

User Friendly Graphical Interface
The user interface of HDAdvance is designed with simplicity. You will find that it is easy to navigate the game files and use the command to manage the game files. Other than converting PS2 games into harddisk, you can find other commands to relabel the files or to delete the file.

Excellent Compatibility
Over 95% of games work with HDAdvance without flaw when running from your hard disk drive. HDAdvance is compatible with both the official PS2 harddisk and standard IDE harddisks. HDAdvance supports 40GB to 200GB harddisk. HDAdvance 3.0 support 40GB to 200GB harddisk.

More Games
HDAdvance 3.0 supports up to 200GB harddisk. So, you can store more games in the larger harddisk.

Screenshot

The main page of HDAdvance 3.0 . A File List which lists the files stored in the harddisk is placed on the left hand side. On the right hand side, there is a options menu for you to manage the game files, run file, convert a new game, delete a file, relabel a file.

What Inside the Bag

1. HDAdvance 3.0 CD version (x1)

2. HDAdvance 3.0 DVD version (x1)

3. User Manual (English) (x1)

Xecuter Hard Drive Case for Xbox 360 Slim

Mon, 17 October 2011 21:03:40 -0400

IN STOCK

The Xecuter Hard Drive Case For Xbox 360 Slim allows you to connect any 2.5" SATA hard drive to your Xbox console. This is perfect for replacing a damaged hard drive case.

This is for the hard drive enclosure case only. Hard drive is not included. The color of this case is BLACK and fits all Xbox 360 Slim versions (Not compatible with the older Xbox 360 Phat)

Easy install of 2.5" SATA Hard Drive
Compatible with all Xbox 360 Slim (non phat) models
Replace your old, damaged, broken hard drive case
Easily install
Includes all stickers to to match your original case
High end quality

Solderless 360 Clip (great for Progskeet)

Thu, 13 October 2011 02:03:10 -0400

IN STOCK

Product Features:

Perfect companion for the ProgSkeet
Able to dump and write to a 360 NAND on almost all consoles (except Xenon) WITHOUT soldering
Save a lot of time with the new glitch hack
Works on XBOX 360 / XBOX / PS3 / Wii / MP3 / MP4 / Tablet

Package Content:

Solderless 360 Clip
32 Pin Flat Cable
PCB Board

While many teams announce their modules for Glitch hack, a well known team on the scene Wii again about her: this is the Wii clip team. Originally, the clips offered by the team allowed for the Wii chipped seamless. With the recent announcement Glitch hack and the growing need to dump the nand Xbox 360, the team decided to develop a 360Clip.

This tool has many advantages because it is easily installed, it is reusable and fits all 48-pin NAND (Xbox, PS3, Wii, etc). On the Xbox 360, no more weld will be necessary to dump and write the nand, which should delight the least experienced of the soldering iron to prepare Glitch hack.

It will do more than install a chip such as X360Glitchip example. Finally, it is possible that this tool is a boon to players who bricks their PS3 or Wii or want to try to downgrade.

Lizard Speaker

Sat, 08 October 2011 21:05:32 -0400

IN STOCK

Simple 1 wire one solder install speaker for maximus Lizard

X360USB Pro Monster Bundle #2 Jungleflasher Edition

Fri, 07 October 2011 06:00:10 -0400

The CK3 Lite has been discontinued. We will be offering a new bundle as soon as we get more power connectivity kits.

X360USB PRO MONSTER BUNDLE - SAVE $$$

The ultimate collection of 360 DVD Upgrade & Repair Tools.

XECUTER X360USB PRO Jungleflasher Edition
XECUTER CK3 LITE
XECUTER UNLOCK KIT (SLIM OR PHAT, DEPENDING ON WHAT YOU CHOOSE FROM THE DROPDOWN MENU)
XECUTER AC MOLEX ADAPTER
110V WALL POWER CABLE FOR AC MOLEX ADAPTER

As well, it comes with all cables that come with each device listed above.

X360USB Pro & CK3 Mini Mega Bundle #3

Fri, 07 October 2011 05:58:47 -0400

IN STOCK - Receive your order in 3-5 days from us in USA/Canada.

X360USB PRO MEGA BUNDLE #3 - SAVE $$$ A superb collection of 360 DVD Upgrade & Repair Tools.

OVER $100 VALUE !!!

Kit Includes:

XECUTER X360USB PRO
XECUTER CK3 MINI *NEW*
XECUTER UNLOCK TOOL V2 (PHAT DRIVES) OR SLIM UNLOCK TOOL (YOU CAN CHOOSE)
XECUTER AC MOLEX ADAPTER
IEC MAINS OUTLET POWER CABLE FOR AC MOLEX ADAPTER
MOLEX TO SATA POWER ADAPTER

As well, it comes with all cables that come with each device listed above.

X360USB Pro & CK3i Mega Bundle #2 Jungle Edition w/ Bonus USB TO MOLEX 5V POWER CABLE

Fri, 07 October 2011 05:55:55 -0400

IN STOCK - w/ Bonus USB to MOLEX 5V POWER CABLE (to power CK3i)

NOW INCLUDES THE NEW XECUTER CK3i INSTEAD OF THE OLD CK3 PRO !

The all in one kit for flashing all 360 drives! X360USB PRO MEGA BUNDLE - SAVE $$$

X360USB PRO MEGA BUNDLE - SAVE $$$

The ultimate collection of 360 DVD Upgrade & Repair Tools.

XECUTER X360USB PRO
XECUTER CK3i - NEW VERSION !
XECUTER CK3i CASE
XECUTER CK3 PROBE 3
XECUTER UNLOCK KIT (SLIM OR PHAT, DEPENDING ON WHAT YOU CHOOSE FROM THE DROPDOWN MENU)
USB TO MOLEX 5V POWER CABLE

If you order the Molex PSU Adapter from the drop down menu, it will also come with a free standard IEC mains outlet power cable.

As well, it comes with all cables that come with each device listed above.

X360USB Pro & CK3i Mega Bundle #1 w/ Bonus USB TO MOLEX 5V POWER CABLE

Fri, 07 October 2011 05:54:30 -0400

IN STOCK - w/ Bonus USB TO MOLEX 5V POWER CABLE

NOW INCLUDES THE NEW XECUTER CK3i INSTEAD OF THE OLD CK3 PRO !

The all in one kit for flashing all 360 drives! X360USB PRO MEGA BUNDLE - SAVE $$$

X360USB PRO MEGA BUNDLE - SAVE $$$

Xecuter NAND-X Wires Install Kit

Wed, 28 September 2011 08:59:44 -0400

IN STOCK

This is the wires install cable for the NAND-X. Simply solder the wires to the correct points on the motherboard and plug into the NAND-X. Easy !

X360key / xKey Install Service

Wed, 28 September 2011 08:01:03 -0400

This is for an install service on the X360key / xKey device.

The turnaround time for this install service is about 1 business day from when we receive it (sometimes delays do occur so it may take an extra day or so)

If you are from the USA, your console will stay in the USA. If you are in Canada, your console will stay in Canada. This way, we are guaranteed no issues with customs!

You can choose to ship your X360key to us with your Xbox 360 or you can choose to purchase the X360key as well as this install.

We will extract the keys from your DVD drive in order to be able to use the X360key. As well, we will fully install the X360key with a neat and professional install.

This is able to be installed on all Phat Xbox 360's, and most Slim 360's (except for Hitachi 0500AA, and Liteon 1214)

Xbox 360 Flashing Service (Slim Xbox 360's) to Latest iXtreme Firmware

Wed, 28 September 2011 07:32:24 -0400

This listing is for Slim Xbox 360 consoles. For Phat consoles, scroll up.

You will be e-mailed all shipping instructions once your order is placed.

The turnaround time for our flashing service is about 1 business day from when we receive it (sometimes delays do occur so it may take an extra day or so)

We are back again with our flashing services for the Xbox 360.

If you are from the USA, your console will stay in the USA. If you are in Canada, your console will stay in Canada. This way, we are guaranteed no issues with customs!

Here are ways to determine which Xbox 360 drive you have:

SLIM XBOX 360's

Now if you've identified an Hitachi drive (as on the left drive tray image) then you're basically out of luck @ the moment - little (if any) progress has been made on the hacking of these drives. They appear to be pretty rare, so this is probably the main reason!

If you have the Liteon drive on the right, there are basically a few versions of them:
1) Liteon 9504 - $39.95 for flashing
2) Liteon 0225
a) MXIC Chipset - $39.95 for flashing
b) Winbond Chipset - $39.95 for flashing however you will also need the Team Xecuter Liteon D6-16D4S Replacement PCB LOCATED HERE which is an additional $74.95 however if purchased with our flashing service, we can do $64.95. The reason it requires the Liteon DG-16D4S Replacement PCB is because these drives have write-protect enabled on them, meaning you cannot write to these drives (without having to drill into the chipset, potentially ruining the drive)

3) Liteon 0401 - $39.95 for flashing however you will also need the Team Xecuter Liteon D6-16D4S Replacement PCB LOCATED HERE which is an additional $74.95 however if purchased with our flashing service, we can do $64.95 . The reason it requires the Liteon DG-16D4S Replacement PCB is because these drives have write-protect enabled on them, meaning you cannot write to these drives (without having to drill into the chipset, potentially ruining the drive)

Now if you have an 0225 drive, the true way to find out whether it is Winbond or MXIC is to open the drive and look at the chipset. This picture will show you how to determine which verison it is:

If you have a Slim Xbox 360, it will be flashed with LT 3.0 for all Slim 360 Liteon drives. LT V3.0 is compatible with the latest dash and has AP2.5/2.6 built in and also offers XGD3 ORIGINAL booting.

Currently all firmwares considered XBL safe (on the latest dashboard - although nothing is ever 100% safe).

If you are not 100% sure which drive you have, you can still send it in and we can verify once you open your console. Basically, it is $39.95 for flashing. If it is anything but the 9504 drive, it will be an additional $64.95 for the Team Xecuter Liteon D6-16D4S Replacement PCB LOCATED HERE . We can always add the PCB board to your order later once we find out.

Xbox 360 Flashing Service (Phat Xbox 360's) to Latest iXtreme Firmware

Wed, 28 September 2011 07:31:58 -0400

This listing is for Phat Xbox 360 consoles. For Slim consoles, scroll down.

You will be e-mailed all shipping instructions once your order is placed.

The turnaround time for our flashing service is about 1 business day from when we receive it (sometimes delays do occur so it may take an extra day or so)

We are back again with our flashing services for the Xbox 360.

If you are from the USA, your console will stay in the USA. If you are in Canada, your console will stay in Canada. This way, we are guaranteed no issues with customs!

Basically, you do not need to know which drive you have as we can flash all Phat 360 drives for $39.95

If you have a Phat Xbox 360, this is what your drive will be flashed with:
Liteon / BenQ Drive - LT 3.0
Samsung - LT 2.0
Hitachi - LT+ v1.1
Hitachi 78/79 - LT+ v1.1

Currently all firmwares considered XBL safe (on the latest dashboard - although nothing is ever 100% safe).

Maximus Trident MX

Tue, 20 September 2011 16:42:31 -0400

IN STOCK

Trident MX by Team-maximus

Based on the Macronix Power trick recently leaked we have developed a professional, safe, simple to use, and reusable tool.

The Trident MX tool will Unlock the Write-protected Lite-on Slim drives DG-16D4S that comes with a Macronix internal SPI Flash. Until recently locked drives where only found in the firmware’s 0225, 0401 and 1071, but the latest dashboard update (2.0.13599) has locked the 9504 drives with 0272 firmware, The Trident MX is a MUST have in your arsenal of weapons.

Combined with the POWER of Maximus Lizard (Gecko 1.16 and above) and in a few days supported by Jungleflasher, this is the perfect tool to do the job professionally and without hassle.

Forget about tricking the drive with unsafe methods of picking and choosing different resistors; We have a 0 to 100 ohm trimmer installed. There is no need to run a complex application to do the Macronix Unlock - Maximus Lizard does the magic for you.

The Trident MX is a tool designed for pro-modders but will be loved be even by the newest Modder !!

Features:
a) Designed to work with Macronix Power trick (requiring only 1 cut)
b) Precision controlled Shoot time; will not cause overheating of the Voltage Regulators
c) Automatic Control - "just push down” operation
d) Also support’s a manual mode with a simple button press
e) Retry system with automatic safe-tested time increments.
f) The perfect companion tool for Lizard and Jungleflasher
g) Shipped in a protective case for storage between uses

Note: This tool works only with Macronix SPI Flash. (For Winbond we are still developing a proper and safe solution to be announced at another time.)

Maximus Xtractor 3

Tue, 20 September 2011 16:39:04 -0400

Maximus Xtractor 3.0

Protective Plastic Case
Powered by USB PORT (all Drives, except Hitachi)
3 User programmable Buttons (1/2 tray, Power Cycle, Mode B)
Perfect companion for Maximus Lizard
Includes:
Xtractor 3
Power to Molex Adapter
DVD Power Cable

Base Functionality :
- Supplies Power to 360 DVD Drives including Eject function or all drives
- Compatible with All Xbox 360 DVD Drives (Hitachi, Samsung, Benq, including all Lite-on drives
- Selectable Mode-B for Hitachi Drives
- Power Protection Circuit
- Power LED/Flash mode LED/USB visual activity LED
- Compatible with Windows XP, Vista, 7 and DOS
- Electrically Safe, operate in the voltages required for the DVD Drive

New Features on XT3:
- Automatic Power Cycle with a Single button Press
- Automatic Half Tray with a single button press
- New and improved main power controller.
- Onboard Firmware Updateable via USB
- Drive connector cable with color indication for proper installation
- Battery Power Optional
- 3 user progrramable buttons for 6 differnt settings
- USB power selectable

After the success of the very first Maximus 360 Xtractor Pro tool kit comes the latest evolution in the Xtractor range, the Xtractor Pro v3, there has been some subtle yet very significant changes to how the new 360 Xtractor 3 functions, it has all the same features of the former model (except serial port), but it’s really the newest edition to the Maximus Xtractor product line that set it out from the rest, the new functions and features have been aimed at making the whole process of flashing the drives a more user friendly and a simplified process, we explore some of these new and unique functions of the 360 Xtractor Pro v3 below and think some of you will be surprised at the evolution of the device..

These new automated command sequences (macros) that are now mapped to the buttons on the 360 Xtractor v3 device itself can also be integrated into Maximus Lizard Toolbox software. All in a NEW protective Plastic Shell.

The Maximus 360 Xtractor Pro v3 is now using a much more powerful main processor which is responsible for these new features being added such as the Macro mode sequences and will allow for new features to be added in the future. Now I hear you asking how can new features be added in the future, well this is the really cool part about the 360 Xtractor 3, these are the very first flashing tool that have the ability for its core logic to be updated, that’s right the Xtractor Pro v3 is firmware updatable and so far is the only tool of its kind to boast this feature.

Maximus 360 Lizard USB 360Lizard

Tue, 20 September 2011 16:33:11 -0400

IN STOCK

Each Kit includes:
1 - Maximus Lizard
1 - Maximus Lizard Power Drop Unit (To power DVD Drive)
1 - 3 foot USB Cable
1 - 0.5 meter SATA Cable
1 - Scorpion 2 Adapter (NO Cut/No Solder Tool) **INCLUDED
1 - Old Style X360 Unlock tool

Matrix Nand Programmer

Sat, 17 September 2011 20:48:02 -0400

IN STOCK

Matrix NAND Reader/Writer.

- Fully compatible with all XBOX360 NAND models.
- Fully compatible with NandPro2.0e Software and other third party softwares.
- Easily reprogrammable with via USB connector.
- Quick reading and writing times.
Microchip Based.

Xecuter CoolRunner

Wed, 14 September 2011 05:19:21 -0400

IN STOCK - Comes with FREE 68nf ceramic capacitor for the problematic Jaspers!

The highest quality reset glitch mod at the lowest price - accept no imitations !

World famous XBOX hardware developers Team Xecuter are happy to introduce the Xecuter CoolRunner - The Ultimate Reset Glitch Mod !

Works with both Phat and Slim in one device
Unique design - do not confuse with other brands that have copied the public schematics
Optimized timing for each motherboard version
Compatible with all Xbox kernel versions
Easy programming via JTAG
Power LED
Reset Cycle LED
Easy Install (7 Wires Slim, 6 Wires Phat)
Powered by CK3 Lite, CK3 Pro or CK3i for JTAG Programming
Works perfectly with the world famous Xecuter NAND-X
QSB Add-on available that connects to both the CoolRunner and the NAND-X (Sold Seperatly)
Trusted Xecuter Design & Warranty

*Not available for the old Xenon motherboards.

Controller and Battery USB Charging Dock Station for XBOX 360

Tue, 13 September 2011 00:01:05 -0400

IN Stock

XBox360 Charging Dock: Recharge the XBOX360 wireless controller,simultaneously recharge the controller and battery pack by using USB connection.Red LED charging indicator lights.It can recharge the AA rechargeable batteries with different capacity.
Working voltage:
USB5V
Working current:
500MA.

How to use:
Set the official XBOX360 wireless controller in the front charging dock,and only put the battery pack in back charging dock.
The PAD LED light indicates the charging status of controller,BAT LED light indicates the charging status of battery pack.
Plug the USB cable into the charging dock and the USB port of console.
If the red LED light in charging,it keeps red,it means the battery is recharging.
When the battery is fully charged the LED light will keep green.

Phat to Slim Xbox 360 Power Supply Converter

Mon, 12 September 2011 23:56:28 -0400

IN STOCK

You can now use the power supply from your Phat Xbox 360 on a Slim Xbox 360 console! Simply plug in the convert cable to the Phat PSU and connect to your Xbox 360 Slim.

Much cheaper than having to buy an extra PSU if you own both versions of console. Cable length: 24 cm

Xbox360 4800mAh Battery Pack with Rechargeable Cable (White)

Mon, 12 September 2011 23:54:05 -0400

IN STOCK

Xbox360 4800mAh Battery Pack with Rechargeable Cable White:
This 4800mAh battery pack is compatible with Xbox360 wireless controller, recharge your XBOX360 wireless controller while you play;
1. Charge cable enables continuous game play;
2. Battery offers up to 18 hours of play per charge;
3. Battery fuel gauge through the Xbox Dashboard;
4. Includes charge cable and NiMH rechargeable battery pack.

Xbox360 4800mAh Battery Pack with Rechargeable Cable (Black)

Mon, 12 September 2011 23:51:35 -0400

IN STOCK

Xbox360 4800mAh Battery Pack with Rechargeable Cable Black:
This 4800mAh battery pack is compatible with Xbox360 wireless controller, recharge your XBOX360 wireless controller while you play;
1. Charge cable enables continuous game play;
2. Battery offers up to 18 hours of play per charge;
3. Battery fuel gauge through the Xbox Dashboard;
4. Includes charge cable and NiMH rechargeable battery pack.

External Cooling System for Xbox 360 (White)

Mon, 12 September 2011 23:42:53 -0400

This Xbox 360 External Cooling System keeps your Xbox 360 running at optimal conditions. The cooler is a snap-on cooling attachment that easily connects to the Xbox 360. It provides increased air flow away from the Xbox 360 system, allowing a cooler and better ventilated environment. The cooler is ideal for cramped entertainment centers. No internal modification of the Xbox 360 is required. A pass-through power connection utilizes the existing Xbox 360 power supply, negating the need for an extra AC adapter. Get extended life, reliability and gaming with this external cooler for your Xbox 360!

Reduces the temperature of your Xbox 360 to improve performance and minimize wear
3 quiet powerful fans increase the system airflow, keeping the console cool, even in confined spaces such as entertainment centers
Powered by the Xbox 360 console, no extra AC adapter needed
Designed to support both vertical and horizontal positions
Compact design
Snap-on assembly for easy installation, no tools required
Strategically designed to assist the Xbox 360’s built in heat management system
Cooler temperatures mean extended life and reliability
Auto or manual power on and off

External Cooling System for Xbox 360 (Black)

Mon, 12 September 2011 23:41:12 -0400

Reduces the temperature of your Xbox 360 to improve performance and minimize wear
3 quiet powerful fans increase the system airflow, keeping the console cool, even in confined spaces such as entertainment centers
Powered by the Xbox 360 console, no extra AC adapter needed
Designed to support both vertical and horizontal positions
Compact design
Snap-on assembly for easy installation, no tools required
Strategically designed to assist the Xbox 360’s built in heat management system
Cooler temperatures mean extended life and reliability
Auto or manual power on and off

3600mAh Rechargeable Battery Pack for Xbox 360

Mon, 12 September 2011 23:29:30 -0400

IN Stock

This extra life battery pack provides you longer time game playing and prolongs your entertainment time due to its expanded power range of 3600mAh. Simply plug the charger into the AC adapter (5V output) with USB socket or the computer or the Xbox 360 console. The indication light will be turn on during recharging.

Please use up the battery before recharging to prolong the battery life. The initiate charge time should be over 8 hours.

Extra Capacity: 3600mAh
Rechargeable Cable: USB to DC 2.35* (0.7 DC cable with direct plug)
Battery pack output voltage: DC 2.4V

Microsoft Xbox 360 Component HD AV Cable

Mon, 12 September 2011 23:21:15 -0400

IN STOCK

Showcase stunning Xbox 360 high-definition graphics with the component connection on your HDTV. Play high-quality audio with the included stereo connection or use the optical audio port for digital sound. The eight-foot shielded cable also includes the more traditional composite connections for use with standard-definition televisions.

XCM X8 X-Tool (X-8) 360 Slim Pro opening tool

Sat, 10 September 2011 21:04:42 -0400

IN STOCK

Disassembling the Xbox 360 Slim console is tough and a pain to work with. A lot of gamers broke their console trying to disassemble the Slim and we are now releasing an X8 Unlock tool set (total of 8 pieces with special made screwdrivers) for opening Xbox 360 Slim consoles. It will be quite easy to open the Slim console with the correct set of tools now.

How to Dissassemble Xbox 360 Slim using XCM X8 Unlock Tool: http://www.youtube.com/watch?v=p2BCl9sMs3Q

Matrix Glitcher II- 360

Sat, 10 September 2011 00:45:08 -0400

IN STOCK

Beware of clones! Only buy from authorized resellers!

A complete redesign of the best selling Matrix Glitcher, The Glitcher II was developed on the ground of the countless feedbacks received from our customers and official resellers during the previous months.

The Matrix Glitcher II does not need anymore to be programmed before it can be used. It already contains all the software code necessary to work with all the Glitchable models of FAT and SLIM Xbox360 at the date of the release of the product.

The selection of the console type and model is done simply by positioning the Switches present on the Glticher II in the position indicated by the installation manual.

-One of the biggest issue faced by installers was the different behavior of the same models of Xbox360. To help them overpass this we added the the possibility to be connect the Glitcher II to a PC using the same Matrix External programmer already available with our Matrix Freedom PCB. Once connected to the PC it is possible to use the fine tuning software to try and identify the best timings for his own console.

Installation diagrams and tutorials are available in the Download section of our website.

·          Booting of unsigned code on Xbox 360 and XBOX360 slim
·          Preprogrammed with a brand new and advanced Matrix Glitching code.
·          Compatible with all Xbox360 SLIM and FAT models (except Corona and Xenon motherboard)
·          On board switch to quickly select console type and model.
·          Future-proof updateable with external USB programmer (not included).
·          After-installation fine tuning of glitch timings to better fit each different console (external USB programmer needed)
·          Quick installation (7 Wires on Slim or 6 Wires on Phat)
·          Compact PCB size with easy to solder pads.
·          Unique Serial code identification for each Glitcher II verifiable online.

E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak

Fri, 09 September 2011 20:28:14 -0400

Back in stock on or around Monday, February 9. Your credit card will not be charged until it ships.

This Ultimate PS3 Downgrade Device - will allow you to downgrade ANY PS3 from 4.00 to 3.55!

This device will just be solderless for consoles with NOR flash, not NAND at the moment

Here is a great installation video:

This is what the E3 flasher comes with. If you see someone selling it for cheaper, it is because they do not include everything:

PLEASE NOTE: This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering! As well, the plug that they include with the sata dock is not North American.

This PACKAGE we are selling will include: E3Flasher, FREE ESATA Station (for the HardDrive) & FREE PS3 Slim Switch

Please double check to make sure it works with your PS3 as we will not accept refunds if it is not compatible with your PS3 after it has been installed.

Watch the Official E3DIY Video: CLICK HERE

NOR FLASH ON board
3 save MODE
1 KEY backup or restore, simplicity is best
Compatible with all PS3 console - FAT models require soldering
Integrated interface varieties, perfect extension, will have more functions with future E3 accessories

Xecuter 360 USB Pro X360USB Pro JungleFlasher Edition with case

Sat, 03 September 2011 03:17:39 -0400

IN STOCK - If you are in USA / Canada - receive your order in 3-5 business days from us!

This is the SPECIAL JUNGLE EDITION of the X360USB PRO. It is a limited edition of only 1000 units and is sold on a first come first served basis. For every one sold a $5 donation will be made to the awesome guys at JungleFlasher.net !

This device will also support flashing for the Slim 360's.

Xecuter's X360USB PRO is the world's first SATA to USB Mass-Storage controller that not only enables WINAPI over USB, but also PORTIO. This powerful all-in-one converter can be used with any software or hardware that uses these signals to work. Designed by Team Xecuter in conjunction with the experts at Team Jungle, the X360USB PRO adapter is the most advanced WINAPI/PORTIO to USB adapter ever created. One stand out feature is that you are now able to connect all Xbox 360 DVD drives to any PC or Laptop for the first time simply by connecting to a USB port. No more struggling with specific SATA chipsets or issues with awkward operating system setups. Now tasks such as repairing your Xbox 360 DVD drives firmware or upgrading your broken DVD drive to a new one without the expensive fees charged by the manufacture just got easier than ever before. Whether you are a beginner or advanced user, this multi-use Mass-Storage controller is an essential addition to any toolkit.

The X360USB PRO includes the following features:

•Connect any SATA device to any PC or laptop via USB
•Compatible with Xbox 360 DVD drives Hitachi, Samsung, Benq & Liteon (FAT)
•Compatible with Xbox 360 DVD drives Liteon & Hitachi (SLIM)
•Repair your Xbox 360 DVD Drive within minutes - no more weeks of waiting !
•No SATA Port Required
•Fully compatible with tools like Jungle Flasher
•No More Driver / OS / SATA / Compatibility Problems
•Fully Upgradeable On-Board Firmware
•Supports Mass Storage Mode As Default
•Dual Mode PORTIO & WINAPI
•Enhanced WINAPI speed for tools such as Xbox Backup Creator*
•Power, Status & Activity LED's
•Team Xecuter's Superior Manufacturing Quality
•Team Xecuter Backed Warranty
•24/7 Support Forums - Over 176,000 Members Since 2002
•Official Product Website: http://www.x360usb.com

*Xbox Backup Creator's indented use is for making back-ups of original games you own and not for piracy. We in no way condone piracy of any kind !!!

Disclaimer

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity. Opening your Xbox 360 renders your warranty null and void. You should not attempt to repair your Xbox 360 unless it is no longer under warranty, or else you do NOT intend to use your warranty. ModchipCentral is not responsible for any damage done to your Xbox 360 or any other devices that you may use with the X360USB PRO. Please do not attempt to repair your Xbox 360 unless you have experience working with computer hardware.

Xbox & Xbox 360 are registered trademarks by Microsoft Corporation. No affiliation between the Team Xecuter or ModchipCentral.com and Microsoft Corporation exists or is implied.

MolexT Portable Power Supply

Thu, 25 August 2011 21:50:28 -0400

IN STOCK

The MOLEXT is the first professionally manufactured, high powered portable Molex power supply unit that is an absolute must have for any serious mobile modder.

Batteries and AC/DC Power supply not included but will be available to purchase separately.

Features:

Portable Molex Power Supply
2 x 9v Alkaline Batteries
AC/DC Pass through (Wall socket / Car Adapter etc)
Dual Battery Power Level LED indicators (Green:Good, Orange:OK, Red: Change Battery)
High end circuit giving outstanding battery performance
Power Status LED
Made In The USA
Team Xecuter tested and approved

Injectus JTAG Programmer for Progskeet

Mon, 22 August 2011 19:53:25 -0400

IN STOCK

Comes with

Injectus programmer
Flat ribbon cable

The inejectus programmer is a JTAG programmer for the following devices

Progskeet
Argon
Dright (1 wire needs to be soldered on to make it compatible)

Xecuter CK3 Lite Case

Thu, 18 August 2011 14:24:55 -0400

IN STOCK

After several design selections by the community, Xecuter have finally released a superbly designed case for the CK3 Lite.

Easy to fit with separate parts for the Eject & Modeb buttons along with a toggle switch, a superb little buy if you already own a CK3 Lite.

A precision built design with the quality that you expect from Team Xecuter

Xecuter CK3 Pro Case

Thu, 18 August 2011 14:22:59 -0400

IN STOCK

After several design selections by the community, Xecuter have finally released a superbly designed case for the CK3 Pro.

Easy to fit with separate parts for the Eject & Modeb buttons along with a toggle switch, a superb little buy if you already own a CK3 Pro.

A precision built design with the quality that you expect from Team Xecuter

Wasabi360 - ODE for Slim / Phat 360

Fri, 05 August 2011 18:56:57 -0400

Preorder

Please select X360 for older 360s, or X360s for Slim 360s

Your credit card will be charged as soon you submit your order. If you do not wish to wait, do not preorder.

The ultimate ODDE (Optical Disc Drive Emulator), allows you to emulate your 360's optical disc drive and run Xbox 360 or Xbox 1 ISO's from HDD. No more hunting for game discs, simply execute your favourite ISO's from any ESATA HDD. Easy, fast, safe and convenient.

Features include:

Solderless installation
Selection of your favourite ISO's via our intuitive user interface
Support for AP25 enabled ISO's
ESATA interface is used in place of USB providing superior performance, since data is transferred directly between the ESATA HDD and Xbox 360 resulting in impressively high bandwidth, many times faster than reading from a real DVD disc
Elegant and streamlined console inspired case design
Versions available for both fat and slim consoles
NTFS file system natively supported
Powerful embedded CPU running performance tuned Real Time Operating System
Regular firmware updates available free for download
Fully updatable hardware (MCU and FPGA's) from ESATA HDD including a failsafe recovery mode
No need to modify your original ODD
Hardware selectable pass through mode - providing access to the original ODD

Features coming soon:

Xbox Live compatibility
Dumping of X360 ISO's from original discs

Xecuter RROD 360 PRO Repair Kit II 5-Pack

Fri, 05 August 2011 10:32:31 -0400

IN STOCK

5 in 1 Kit - A Special Priced bundle package with enough parts to repair 5 Xbox 360's - Saving you over $50 !!

This is the new and latest version of our amazingly popular Xbox 360 RROD (Red Ring Of Death) Repair Kit.

After much testing Xecuter have designed and perfected the exact specifications for the our own unique version of the famed X-Clamp fix – including custom made K-Pads for the memory chips and for extra cooling, two custom designed additional heatsinks are included for installation on both the southbridge and ANA Scaler chips (Solves most E74) . Each replacement screw has been designed to fit perfectly with the original Xbox 360 motherboard removing any need for drilling or unwanted warping.

The Xecuter Xbox 360 RROD PRO Repair Kit PRO II includes all tools needed and 5 x full tubes of high quality heat silicon paste. This fix has become the defacto solution in repairing the majority of the RROD (red Ring Of Death) Xbox 360’s.

In our own tests this kit fixed 98% of faulty Xbox 360 consoles !

This kit is very easy to install and includes enough parts for 5 Xbox 360's. This kit also includes the screwdrivers (Torx 10 and Torx8 and Allen Key), a specially designed X-Clamp Kit to fit both the CPU and GPU, specially formulated K-Pads for the memory chips and 2 custom designed heatsinks for the southbridge and ANA Scaler chips and a tube of high quality Heat Silicon Compound.

As this kit fixes most RROD issues we cannot offer any guarantee of 100% success, however this is the best kit you will find, anywhere.

All Tools Included
Torx 10, Torx 8 Screwdrivers
Allen Key
5 x Tubes of high quality silicon paste
20 x Thermal K-Pads (Essential Part Of The Kit - Expensive Material & Super Effective)
10 x Southbridge / ANA Scaler Heatsinks *NEW ADDITION*
Precision designed bolts with low profile head
Precision designed washers at optimum width
No drilling required
Easy install
Very high success rate.
Fixes most RROD, RLOD, E74, No Video/Audio Errors

DO NOT ACCEPT CHEAP IMITATIONS – THIS IS NOT A NORMAL X-CLAMP FIX !!! BEWARE OF OTHERS TRYING TO SELL YOU KNOCK OFF VERSIONS – ONLY BUY FROM XECUTER RESELLERS !

Instructions: www.team-xecuter.com/rrod

Xecuter Nand-X JTAG KIT #8 (XENON)

Fri, 05 August 2011 10:31:16 -0400

IN STOCK

This is the JTAG kit that is included with the NAND-X. Known as "Kit #8" by those in the know as that was its code name during the NAND-X testing trials. This kit installs to the top of the motherboard.

Works with all Xenon motherboards.

This kit IS INLCUDED with the NAND-X Retail kit. You do not need to own a NAND-X to use this product.

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

Xecuter RROD 360 PRO Repair Kit II

Fri, 05 August 2011 10:30:38 -0400

IN STOCK

This is the new and latest version of our amazingly popular Xbox 360 RROD (Red Ring Of Death) Repair Kit.

After much testing Xecuter have designed and perfected the exact specifications for the our own unique version of the famed X-Clamp fix – including custom made K-Pads for the memory chips and for extra cooling, two custom designed additional heatsinks are included for installation on both the southbridge and ANA Scaler chips (Solves most E74) . Each replacement screw has been designed to fit perfectly with the original Xbox 360 motherboard removing any need for drilling or unwanted warping.

Xecuter Nand-X QSB Install Kit

Fri, 05 August 2011 10:27:01 -0400

IN STOCK

This is the QSB (QUICK SOLDER BOARD) Install Kit that is included with the Xecuter NAND-X. Note these are spare parts and are already included with the retail NAND-X Kit.

Includes the J1D2 and J2B1 Quick Solder Boards for NAND-X Installs. Perfect for those that do multiple installs and what a nice permanent solution for their customer.

Xecuter Nand-X JTAG KIT #2 (NON_XENON)

Fri, 05 August 2011 10:25:44 -0400

IN STOCK

This is the JTAG kit that is included with the NAND-X. Known as "Kit #2" by those in the know as that was its code name during the NAND-X testing trials. This kit installs to the top of the motherboard and to the front ROL (Ring of Light) panel.

Works with all non-Xenon motherboards (Falcon, Zephyr, Opus, Jasper).

This kit IS INLCUDED with the NAND-X Retail kit. You do not need to own a NAND-X to use this product.

Xecuter NAND-X V3 & JTAG Connection Kit

Fri, 05 August 2011 10:15:05 -0400

IN STOCK - these are the latest V3 updated to NandPro 3.0

Xecuter presents the NAND-X & & JTAG Connection Kit. Based on the proven and excellent NAND PRO USB Programmer designed by illustrious scene member Tiros, Xecuter have developed a very tight package that gives you everything you need without having to use any other parts or self-made cables and kits – and certainly without breaking the bank!

Not only do they provide one of the fastest 360 NAND programmers currently available, but they have designed a very simple connection system using their popular and much used quicksolder PCB breakout boards – and as a bonus they have also integrated a programmer so you are able to update the firmware of the ARM Controller to make sure you can keep up to date with future new features and upgrades. Xecuter have also included an optional pin header cable system just like the old XBOX LPC Days

Xecuter Nand-X JTAG KIT #5 (NON_XENON ALT PRO VERSION)

Fri, 05 August 2011 10:13:41 -0400

IN STOCK

This is the JTAG kit that all pro-installers swear by. Known as "Kit #5" by those in the know as that was its code name during the NAND-X testing trials and it quickly gained a reputation as being the best kit available for all non-Xenon motherboards (Falcon, Zephyr, Opus, Jasper).

This kit is NOT included with the NAND-X Retail kit and is a seperate device for professional installers who wish to do the JTAG install on the alt points at the botom of the Non-Xenon motherboard. You do not need to own a NAND-X to use this product.

This PCB is soldered to the bottom of the motherboard and is for professional installers only. Do not attempt to install this if you do not have good soldering experience.

This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

Xecuter NAND-X Pin Headers

Fri, 05 August 2011 10:11:42 -0400

IN STOCK

These are the pin headers that come bundled with the NAND-X. They are a spare part and are ideal for those that wish to do multiple installs without using any QSB's or Wires.

ProgSkeet V1.1 Crystal Blue - NAND and NOR reader/writer

Fri, 05 August 2011 10:10:23 -0400

IN STOCK - use the coupon code progskeet and get 50% off of shipping!

Here is some great information on using the Progkseet: http://www.ps3devwiki.com/index.php?title=Progskeet#ProgSkeet_Tutorials

If you want a solderless clip with it, we have them for sale as well!

THE PROGSKEET BAREBONE PCB
Your one and only solution to your FLASING NEEDS…
Description:
1- Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
2- Blazing fast read/write speed!
3- Beside software-side updates, you can also expect hardware updates powered by customer requests!
4- With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
5- Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
6- Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
And always remember - for accuracy and speed, choose ProgSkeet!

SOME KIND OF DEVICES SUPPORTED (only for study and backup purpuse):
XBOX360 ALL NAND SUPPORT (ALL MODELS)
PS3 ALL NAND AND NOR FLASHES SUPPORT (ALL MODELS)
WII NAND CONSOLE (ALL MODELS)
PSP NAND CONSOLE (ALL MODELS)
ANY NAND OR NOR (CAR MARKET, HANDY PHONES etc, just send us a sample of the NAND and we can add in 1 hour the support to read and write it FOR FREE!)
TRANSFER SPEED: 1MB/sec (ex. about 16 sec. to read or write a whole PS3 Slim NOR flash)

Xecuter CK3 Extended Power / Probe Cable

Fri, 05 August 2011 09:58:14 -0400

IN STOCK

This extended power cable can be used with the CK3 Pro or CK3 Lite as an easy way to give yourself much extra room when working with your drives. The cables are high quality and nicely shrink wrapped to make everything as neat and secure as possible.

The CK3 Extended Power Cable is is 18 inches in length. This cable is for the CK3 Pro or CK3 Lite only, and supports the Mini probe, probe v1, Probe v2. This cable does not support Probe v3.

Sputnik360 Liteon DG16-D4S Slim DVD Unlock Probe

Fri, 05 August 2011 08:13:14 -0400

IN STOCK

The SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Yet another simple and useful device from Team Xecuter.

Enable write mode on Liteon DG-16D4S (MXIC) DVD Drives
Easily repair your Xbox 360 S Console
No lengthy Microsoft warranty repair delays
Easy to use - takes minutes !
1 easy trace cut required
Multiple Resistor options to ensure compatibility
Works on all MXIC SPI's (9504, 0272, 0225 & 0401)
Tested with firmware tools such as JungleFlasher

Xecuter 2.6 CE

Thu, 04 August 2011 00:37:13 -0400

IN STOCK

X2.6 Special Design - New external Switch Bank / Blue/red LEDS included!

New 2.6 design
Programmed ready to use-enables hard drive storage

Xbox Live Ready *Can be used with xbox live

Works on all versions of xbox even the new version 1.6 which was just released!

All Backups of XBOX games will boot flawlessly

All Import Original XBOX games will boot flawlessly

Boots games from ALL release groups - not just some of them

NEW No-Patch Hack - boots all games without any patches

Compatible with CDR/CDRW/DVDR/DVDRW

Can use cheap unbranded general purpose DVDR media

Universal design that works on all models from all regions (USA/JAP/PAL)

Macrovision Removed (Copy your DVD films to VCR - including region 1 to PAL VCR)

Multiple Region DVD Dongles can be used (XBOX normally locks onto 1 region)

DriveKey Wii Modchip (Works with New Mario Bro's)

Wed, 20 July 2011 19:39:52 -0400

IN STOCK

New stock that works with the New Super Mario Bro's. This is the 0ohm resistor Drivekey which works with backups and originals! FPGA version 2.0, software version 1.0. Works with NSMB without any patches. Yellow Sticker on the back of the drivekey!

This is a 100% solderless chip. It works with the epoxied drives and D3 drives but does not work on D3-2 drives.

The Drivekey modchip clips between the motherboard and the Wii drive and allows you to play 100% of your backup games. Again, it is partial compatibility for region free, just like any other modchip out there.

As well, there is no need to provide us with your region of console or your serial number as there are jumpers on the Drivekey to set your region.

Comes with:

- Drivekey Wii Modchip

- Drivekey Logo Sticker

- Drivekey Ribbon Cable

-JTAG Ribbon

- Drivekey Model Sticker

Wiikey Fusion Wii Modchip

Wed, 20 July 2011 19:38:44 -0400

IN STOCK

There are Wiikey Fusion clones out now in China. To ensure you do not receive a cheap non supported clone, be sure to only buy from Wiikey's authorized distributor list. We are official Distributors!

The Wiikey fusion is a brand new mod chip for Nintendo Wii by the Wiikey Team. This revolutionary mod chip will allow you to play your backup ISOs from any SD card or DVD.

The Wiikey Fusion package from ModchipCentral comes with:

Wiikey Fusion Modchip
Drive Cable
Jtag Cable
External SD Card Slot
Double sided tape to mount your Wiikey fusion on the wide of your Wii

Xeno GC Gamecube Modchip

Wed, 20 July 2011 19:34:11 -0400

IN STOCK

Xeno GC is a low cost easy solder (no wires) modchip for GameCube. This chip have a unique hardware design which directly interfaces with the serial debugport on the laser unit.......

Features:

direct boot of DVD+-RW media

compatible with all regions & all versions

region free loading

multigame disc support

wireless install

no need to remove mainboard

PAL/NTSC region force

installation control LEDs

switchable read setting adjustment / error retry

switchable audiofix

anti-static packaging

selfbooting homebrew linux discs (thanks to Isobel)

Modes:
Disable audio fix - Press left shoulder button during disc load.
Disable DRE fix - Press right shoulder button during disc load.
Force NTSC display mode - Press X button during disc load.
Force PAL display mode - Press Y button during disc load.
XenoGC Shell (multigame disc loader) - Press START button during disc load

Status LEDs:
The XenoGC features two status LEDs to indicate correct function. The red LED is active when the drive resets and the chip is doing its job. Once the drive has been patched successfully, the green LED will light up. Check your install if you only get the red LED, or it doesnt light up at all.

Install Diagram:

Supercard DSTwo w/ Free USB Reader

Wed, 20 July 2011 19:24:57 -0400

IN STOCK - updated to DSi 1.4.3 and 3DS 2.1
If you want memory, you can add it to your cart from the dropdown menu below.

● Supports NDS, NDSL, NDSi

- Completely redesigned GUI with a new beautiful interface. System menus are more user friendly.
- Utilizing the CPU, DSTWO can emulate original cartidge. Can pass through and bypass any anti-piracy measures. Patching not needed for most games.
- "Free Cheat": This new exclusive feature during game play will allow you to search for and enable various cheats and hacks, such as modifying or even locking your characters health or enabling/restocking power-ups.
- Increased RTS slots up to 4 individual slots. Added 3D data intelligent detection function, to improve the compatibility of 3D games for more stability.
- Convenient file operation: You can open the file browser to cut, copy, paste, delete files as you like.

Features & Characteristics:

The exact feature list for the Supercard DSTWO has not yet been made available, but from previous announcements we know the Supercard DS TWO will feature the following:

RealTime Functions: RealTime Save, RealTime Game Guide(txt,bmp,jpg) & RealTime Cheat. (More stable, more easy to use, cheat code compatible with R4 and DSTT now)

Multi Saves (Up to 4 slot), Easy to backup and restore saves.

Unlimited MicroSD storage space support. SDHC support. FAT or FAT32.

Multiple languages (English, Simplified Chinese, Traditional Chinese, French, Italian, Korean, Japanese, Spanish)

Built-in GBA & SNES Emulator.

Action Slow Motion (4 levels,).

File Management System (Copy, Paste, Cut and Delete, long file name support).9. eBook (BMP, JPEG, JPG, PNG, TIF, GIF, TXT, PDF).

Perfect support for long file names;

Real-time save slot increase to 4 slots. (Exclusive built-in automatic detection of 3D game engine technology, stability, greatly enhanced);

Give up cheat-code slow motion game play method, improved use of CPU to do operations, "precise control of CPU speed" Achieving the action slowed down, stability / compatibility and better.

Real-Time Game Guide will support txt formats without conversion, beautify the font is more beautiful;

New UI interface design. Easier-to-use.

Advanced multimedia playback: native DivX/XviD playback as well as other major formats, similar to the iPlayer.

R4i SDHC 3DS w/ Free USB Reader and Charge Cable

Wed, 20 July 2011 19:23:25 -0400

IN STOCK - updated to 3DS 2.0

If you want memory, you can add it to your cart from the dropdown menu below.

R4i SDHC 3DS released by R4i-SDHC team which is a Nintendo 3DS compatible flash cartridge. It enables your Nintendo 3DS or DSi or DSi XL to accept a micro SD memory card and you can watch 3D movie, play music, play games,browse pictures and so much more!

Functionality
● Support the Latest N3DS perfectly..
● Realtime skin/themes change function(support random skin/themes selection mode).
● Able to memorize and restore to the previously selected game or application after restarting
   machine and soft reset.
● Able to recognise and display SD card type, volume and type of formating.
● Sleep mode function,for power saving and longer standby time.
● User friendly interface,easy to operate.
● Uses MicroSD card FAT 16 or 32.
● Supports any MicroSD card speed with no lag in game.
● supports Clean ROM.drag and drop.Works on any OS.
● Buit NoPass.
● Supports Moonshell and other homeberw.Open I/O interface.
● SUpports the WIFI-game.DS Rumble Pak.DS Browser.
● Supports the Soft Reset.
● Integrated latest MoonShell 2.0 Beta version.
● DLDI auto-patch.
● Users just one click away from playable games download.
● WiFi search engine function available with NDS/NDSi/NDSiLL.Users are able to search and download
   the games and the latest game information according to their own preferences anytime,anywhere.
● You will be able to manage your NDS/NDSi/NDSiLL download by distance contorl through WiFi once
   you install our Wi-Fi Engine Assistant on your computer.
● Users only need to click on the games they want to download on NDS/NDSi/NDSiLL and the games
   can be downloaded automatically to the assigned computers.
● This can avoid the annoyance of waiting during the download process.
● Through our PC-based Wi-Fi Engine Assistant software,it is able to download our website's NDS
    games quickly and easily.
● Core upgrade automatically through WiFi of NDS/NDSi/NDSiLL to avoid tedious upgrading steps

What is included:

1 X R4i SDHC 3DS card

1 X USB 2.0 Card Reader

R4 SDHC w/ Free USB Reader

Wed, 20 July 2011 19:21:27 -0400

IN STOCK

This unofficial version of the R4 SDHC is compatible with Micro SDHC (high capacity) cards including 4GB, 8GB, 16GB and even 32GB.

The R4 SDHC is a Slot 1 unit for the Nintendo DS and DS Lite. The R4 SDHC does not require any additional Passcard or Passme devices to operate. Simply copy your homebrew or multimedia files onto a low cost, high capacity MicroSD card, insert the card into the the R4 SDHC and now insert the R4 SDHC into your DS or DS Lite and enjoy!

You can play MP3's, read TXT books, and run your homebrew applications with ease. The R4 team has made functionality their number one priority with this new generation of DS development.

2nd generation storage device (no booting tool required)
Flush fitting Slot 1 card
Uses MicroSD card, FAT16 or 32
Supports up to 32GB Micro SD Card
Supports any MicroSD card speed with no lag in game
Compatible with all operating systems
Built in PassCard
Automatically detect save type
Save directly to MicroSD card, not to onboard chip
Supports Moonshell and other homebrew. Open I/O interface
User friendly skinnable interface. Touchscreen or button operation
Supports rumble pak and memory pak
Supports the WiFi game, DS Rumble Pak, DS Browser
Supports changes of the background of Operation Interface
Support Skin DIY by setting background and font colors on Main Menu and Game Menu manually and automatically
Supports 4-scale-lightness adjustment ( DS Lite only )
Supports the Soft Reset
Moonshell 1.6 support Software Reset function( Press START key back to the R4 menu)

R4 Revolution R4DS w/ Free USB Reader

Wed, 20 July 2011 19:19:40 -0400

IN STOCK

The R4 DS is a Slot 1 all-in-one unit for the DS and DS Lite. The R4 DS does not require any additional Passcard or Passme devices to operate. Simply copy your homebrew or multimedia files onto a low cost MicroSD card, insert the card into the the R4 DS and now insert the R4 DS into your DS or DS Lite and enjoy! You can play MP3's, read TXT books, and run your homebrew applications with ease. The R4 team has made functionality their number one priority with this new generation of DS development.

Product Features:
Original DS cart sized device
Drag and drop files, NO software required
Play in SLOT-1 without Passcard or Flashme
Supports TF(MicroSD) capacity up to 2GB
Supports DS sleep mode
Supports FAT16/32 File System
Supports Screen touch sensitive
Compatible with homebrew and moonshell
Compatible all version of DS
Intuitively upgradeable custom operating system

M3 Real w/ Rumble Pack w/ Free USB Reader

Wed, 20 July 2011 19:17:29 -0400

IN STOCK

The M3 DS Real is the newest Slot-1 card brought to you by the M3 team for the Nintendo DS and DS Lite. The M3 DS Real does not require any additional Passcard or Passme devices to operate, it's as easy as plug and play. Simply copy your game files or multimedia files onto a low cost, high capacity MicroSD memory card, plug your memory card into the M3 DS Real and enjoy! You can play MP3's, read TXT books, and run all your homebrew applications with ease. The M3 team has made functionality their number one priority with this new generation of DS card. This simply is the best product currently available for the Nintendo DS/Lite. The M3 DS Real even supports MicroSD HC media which will allow massive storage capacity.

DSTTi w/ Free USB Reader

Wed, 20 July 2011 19:13:41 -0400

IN STOCK

DSTTi Functionality:

DS original cartridge size, Slot1 interface.
Plug 'n Play, easy to use, just Drag 'n Drop file from PC to flash memory card.
No FlashMe, built-in NoPass, and the GBA cards in slot2 can be started directly.
Supports CleanROM, No covert.
100% SDHC TF and standard TF compatibility up to 4TB(4096GB) flash memory card.
High speed SDHC. Supports any TF card speed with no lag in game.
Save directly to TF card, not to onboard chip, Never lose your saves.
Automatically detect and generate save type.
Supports Moonshell and homebrew. DLDI auto-patching.
Supports FAT/FAT32, works on any OS.
Supports Action Replay cheat and edit the code base.
Built-in energy-saving design.
User friendly skinnable interface. Touchscreen or button operation. Supports Skin DIY.
Supports the “Hot-Key” SOFT RESET.
Supports the WiFi game, DS Rumble Pak, DS Browser.
Supports Download play.
Supports 4-scale-lightness adjustment ( DS Lite only ).

CycloDS iEvolution w/ Free USB Reader

Wed, 20 July 2011 19:10:46 -0400

IN STOCK

If you want memory, you can add it to your cart from the dropdown menu below.

● Supports NDS, NDSL, NDSi

- CycloDS iEvolution is a multi-functional Micro SD adapter for NDS and NDS Lite (Slot 1) which allows you to listen to MP3's, view images, read e-books and enjoy the vast collection of homebrew applications for NDS. You can also take advantage of the inbuilt cheat code system to enjoy more freedom with your favourite games.

CycloDS iEvolution is the world’s most advanced Media Enhancer for NDS Lite and NDS. Boasting superior functionality, European design and quality components, CycloDS iEvolution is unparalleled in its field.

Kingston 4GB MicroSD Card

Wed, 20 July 2011 19:07:53 -0400

IN STOCK

Kingston 4GB MicroSD Card

Kingston 8GB MicroSD Card

Wed, 20 July 2011 19:05:43 -0400

IN STOCK

Kingston 8GB MicroSD Card

Kingston 2GB MicroSD Card

Wed, 20 July 2011 19:05:17 -0400

IN STOCK

Kingston 2GB MicroSD Card

Acekard2i w/ Free USB Reader (Anti-counterfeit version)

Wed, 20 July 2011 18:57:57 -0400

IN STOCK - updated to DSi 1.4.3 and 3DS 2.1

Anti-counterfeit version - Enter Serial number here http://www.acekard.com/bar_code.php to verify it is not a clone!

If you want memory, you can add it to your cart from the dropdown menu below.

The all new and all powerful Acekard 2i offers support for NDS, NDS Lite, and the new DSi. Acekard 2 has many great features and is a great buy. The interface is by far the best of any cart available.

Acekard 2i use the technology of directly writting save file to MicsoSD card. No need to manually select save size or backup save when turn on DS. No battery needed. Acekard 2i can use save files from other flash carts and you do not need convert. All you need to do is make sure the save file has the same prefix name and put it at the same directory as the homebrew. Then you can just run the homebrew to use the new save file.

Acekard 2i inherits the best quality of acekard's products. You can just drag and drop homebrew software on MicroSD card to run. On first boot it takes some time to create save file. The loader time after save file is created is very fast.

The Acekard 2i is compatible with all homebrew because of the DLDI auto-patcher. You can just copy the homebrews to the MicroSD card and run it. You can use Moonshell, one of the most well known homebrew software on DS, for multi media. Watching movie, listening MP3, reading TXT novel on DS is so easy!

Product Features:

Supports DSi and NDS Lite

Save file is written directly to TF card. No need to manually select save size, no data loss.

Automatic DLDI patching. Run homebrew programs without converting.

Support soft-reset, Download Play and WiFi gaming!

Support SDHC TF card. Virtually unlimited storage size !

Support any brand of TF, with no slowdown!

Support Action Replay cheats . Build-in editor!

Low power consumption for longer operational time!

Built-in multiple languages and DIY skinning!

Package Contents:

Acekard2i Cartridge
Acekard2i Case
USB Reader
USB Charge Cable

R4i 3DS w/ 8GB Kingston MicroSD Card + Free USB Charge Cable

Thu, 23 June 2011 15:58:23 -0400

IN STOCK - updated to DSi 1.4.3 and 3DS 2.0

If you want memory, you can add it to your cart from the dropdown menu below.

What is included:

1 X R4i SDHC 3DS card

1 X USB 2.0 Card Reader

1 x 8GB Kingston MicroSD Card

R4i 3DS w/ 4GB Kingston MicroSD Card + Free USB Charge Cable

Thu, 23 June 2011 15:57:03 -0400

IN STOCK - updated to DSi 1.4.3 and 3DS 2.0

If you want memory, you can add it to your cart from the dropdown menu below.

What is included:

1 X R4i SDHC 3DS card

1 X USB 2.0 Card Reader

1 x 4GB Kingston MicroSD Card

modchipcentral.com Latest Products

Xecuter CoolRunner SLIM BUNDLE

Kit Includes:

Xecuter CoolRunner PHAT BUNDLE

Kit Includes:

Xecuter CoolRunner - New Rev B Version

Xecuter Nand-X and Coolrunner Pin Header Cable Set

E3 Nor Flasher - Downgrader

E3 Flasher NOR Clip Suit

R4i Save Dongle

Xecuter POST QSB For Xbox 360 Slim

Xecuter CK3 Mini

Xbox 360 Console 250GB Holiday Kinect Bundle - Premodified with X360key / xk3y

Xbox 360 320GB Limited Edition Gears of War 3 Bundle - Premodified with X360key / xk3y

Xbox 360 250GB Holiday Bundle with Fable III and Halo: Reach - Premodified with X360key / xk3y

Xbox 360 4GB Console Premodified with X360key / xk3y

USB Dongle Replacement for X360key/xk3y

X360key / xk3y Replacement Remote - LCD Screen

Xecuter USB to MOLEX 5V Power Cable

68nF 50V Ceramic Capacitor

360-CLIP for NOR 56PIN FLASH

ADAPTOR PCB PROGSKEET

Sputnik360 Liteon DG16-D4S Slim DVD Unlock Switch

True Blue Dongle

Samsung MS28 Replacement Xbox 360 DVD Drive

Unlocked Replacement DG-16D4S PCB Matrix Freedom

Sputnik 360 SPI Unlock Probe PCB add-on

CoolRunner Phat QSB Install Kit

NAND-X To CoolRunner JTAG Cable

Xecuter CK3 to NAND-X Update Cable

USB to NAND-X Update Cable

Xilinx LPT JTAG Cable

Scorpion Grabber 2nd Gen Cable

Maximus Scorpion 2

WiFi Dongle for Xk3y / X360key

LiteOn IHAS124-B Burner Max Compatible DVD+R DL Writer

Kamikaze Winbond Template

CoolRunner Slim QSB Install Kit

Xecuter CK3i

Xilinx Parallel Programmer (for Matrix Glitcher and other CPLD's)

PS2 / PStwo Slim USB Extreme ModChip CD - USBExtreme - NTSC Version

HDAdvance 3.0 NTSC w/ DVD-9 Support

Xecuter Hard Drive Case for Xbox 360 Slim

Solderless 360 Clip (great for Progskeet)

Lizard Speaker

X360USB Pro Monster Bundle #2 Jungleflasher Edition

X360USB Pro & CK3 Mini Mega Bundle #3

Kit Includes:

X360USB Pro & CK3i Mega Bundle #2 Jungle Edition w/ Bonus USB TO MOLEX 5V POWER CABLE

X360USB Pro & CK3i Mega Bundle #1 w/ Bonus USB TO MOLEX 5V POWER CABLE

Xecuter NAND-X Wires Install Kit

X360key / xKey Install Service

Xbox 360 Flashing Service (Slim Xbox 360's) to Latest iXtreme Firmware

Xbox 360 Flashing Service (Phat Xbox 360's) to Latest iXtreme Firmware

Maximus Trident MX

Maximus Xtractor 3

Maximus 360 Lizard USB 360Lizard

Matrix Nand Programmer

Xecuter CoolRunner

Controller and Battery USB Charging Dock Station for XBOX 360

Phat to Slim Xbox 360 Power Supply Converter

Xbox360 4800mAh Battery Pack with Rechargeable Cable (White)

Xbox360 4800mAh Battery Pack with Rechargeable Cable (Black)

External Cooling System for Xbox 360 (White)

External Cooling System for Xbox 360 (Black)

3600mAh Rechargeable Battery Pack for Xbox 360

Microsoft Xbox 360 Component HD AV Cable

XCM X8 X-Tool (X-8) 360 Slim Pro opening tool

Matrix Glitcher II- 360

E3 Flasher 3K Limited Version PS3 PlayStation3 Downgrader & Jailbreak

Xecuter 360 USB Pro X360USB Pro JungleFlasher Edition *with case*

MolexT Portable Power Supply

Injectus JTAG Programmer for Progskeet

Xecuter CK3 Lite Case

Xecuter CK3 Pro Case

Wasabi360 - ODE for Slim / Phat 360

Xecuter RROD 360 PRO Repair Kit II 5-Pack

Xecuter Nand-X JTAG KIT #8 (XENON)

Xecuter RROD 360 PRO Repair Kit II

Xecuter Nand-X QSB Install Kit

Xecuter 360 USB Pro X360USB Pro JungleFlasher Edition with case