Email: sales@modchipcentral.com

 
Home > Xbox 360 > NAND/JTAG/RGH > Xecuter CR3 Lite

Xecuter CR3 Lite

Xecuter CR3 Lite

Xecuter CR3 Lite
Details
SKU cr3lite
Weight 1.00 lbs
 
Market price: $39.95
Our price: $24.95
Options
Quantity

ONLY 6 AVAILABLE!

NOW SHIPPING TX COOLRUNNER REV C MEGA BUNDLE

The Xecuter CoolRunner CR3 Lite is the latest evolution of the original CoolRunner range, the team decided to skip the v2 line and move right to the third gen line. Now the Xecuter CR3 Lite is the ultimate incarnation of the original CR range with tons of features that used to be add-on boards installed on this new model. They have built the CPU reset cleaner on board, also the PLL_bypass cleaner, they have totally redesigned the way the CPU RST cable can be connected to the board along with a brand new double shielded cable that will be sold separately, added a new feature to show the debug LED on the front of the console using the front panel ring of lights just to name a few. We go into more detail below on some of these exciting new features including of course Xbox 360 Slim Corona support. The Xecuter CoolRunner 3 Lite CR3 is going to be the all in one glitch board people have been waiting for, with so many features on the one PCB why use anything else.

Now of course one of the main features of the Xecuter CoolRunner CR33 Lite is support for the Xbox 360 Slim Corona boards, this is enabled by the addition of a high quality and branded 48.000Mhz Crystal on board, the team doesn’t use cheap knock off Crystals and the ones found on board will give the best possible results. Just like the CR Upgrade add-on boards the CR3 Lite will enable RGH on Corona v1 boards which are the consoles that came with a 250GB or 320GB hard drive. At this time the Corona v2 boards which are the consoles that came without a hard drive and have 4GB of memory on board will require a special add-on product to be able to read and write to the NAND, Xecuter are about to release a special USB QSB that can be used with the Corona v2 boards to be able to read and write to the NAND via USB through the J-Runner software, this means it's now possible to use the Xecuter CR3 Lite with these latest corona v2 boards as well which is huge news. Until Sept 2012 there wasn’t a way to read or write to the v2 boards, but early Sept a method was found by soldering in a SD memory card reader to dump the NAND, shortly after Xecuter announced their special USB QSB to be used with the Corona v2 boards to be able to read and write to the NAND and we of course will be selling these as soon as they are released.

The Xecuter CoolRunner CR3 Lite has the teams CPU reset cleaner built on board, these are used to help clean up the signal traveling on the CPU RST cable from the CR3 Lite to the Xbox 360 motherboard. For those that have done a lot of RGH 1 & 2 you will already know that a few consoles you can significantly decrease booting times by having the CPU RST cable run through various capacitor and resistor combinations. An example would be running a 670p cap with a 3.3k resistor and doing this depending on the console model can reduce booting times. The CPU reset cleaner part of the Xecuter CR3 Lite have 3 selectable capacitor values being 470p, 560p & 680p and three selectable resistor values being 1k, 2k, & 3.3k. These can be enabled or disabled via the simple dip switches on the CR3 PCB itself. It’s worth noting that you can also run more than one capacitor or resistor value at the same time, so you can have 560p & 680p caps enabled and all three resistor valued enabled at the same time, this means you can really work out the best combination for the console you may be working on.

While we are on the subject of the CPU RST line the team have also made some changes in that department, while the boards ship with the standard cable for the CPU_RST line the team is going to release a special 50 Ohm Micro Double Shielded & Grounded CPU_RESET cable with a UF.L / UMCC connector which includes ground in the connector itself to be sold separately, they are only 1.53mm thick and up to a 6Ghz passband. These new style of cables can be used with the newly added UF.L / UMCC connector found on the Xecuter CR3 Lite PCB, it’s a simple case of snapping on the CPU RST line to the CR3 and both ground and data lines are handled through this simple yet effective UF.L / UMCC Connector. Note once again that the team decided that these UMCC connector cables would not be included with the CR3 and will be sold separately, we will stock these cables for people that wish to buy them and use instead of the standard cables and will have them listed up as soon as possible.

It goes without saying that the Xecuter CoolRunner CR3 Lite is without a doubt the most advanced and updated glitch board on the market, the team decided to release it simply because there was so many cheap knock off clones on the market and it was time to incorporate all the improvements found by the community and team into one neat little package. If you are an end user or installer and you want to be using the very best hardware and not some cheap knock off with only a fraction of the features found on the Xecuter range then the CR3 Lite is the board for you. Given the up and coming CR3 Pro is going to have some extra stuff again for the Slims we think in the meantime using these Lite models is going to make a huge difference compared to the older designs (and clones) out there.

FEATURES:

  • Brand new design from the all new CR3 Range !
  • Next-Gen RGH Circuit - Embedded All Current Fixes & Tweaks
  • Quality Assured - No Cheap Chinese Knocks-Offs
  • New RGH1 PLL_BYPASS Cleaner Switches (680pF, 150pF, 100nF, 68nF, 47nF Caps)
  • New RGH1 & RGH2 CPU_RESET Cleaner Switches (1k, 2k, 3.3k Resistors and 470pF, 560pF 680pF Caps)
  • New Corona Support - High Quality Branded 48.000Mhz Crystal (No cheap quality knock offs - gives higher performance)
  • New UF.L / UMCC Connector for CPU_RESET (Includes Ground - Plug In Adapter No Soldering to the CR3 Lite required)
  • New 50 Ohm Micro Double Shielded & Grounded CPU_RESET Cable (Only 1.53mm and up to 6Ghz passband)
  • New Built In ROL Option (Show Debug LED On Front Panel Ring Of Light) ( * see note)
  • Built-in Ribbon Cable Connector For DemoN (Includes CR_EN and XSVF Programming - no soldering or wires)
  • Enable/Disable C15 Jumper
  • Enable/Disable 10 Ohm Jumper
  • Unique design - do not confuse with other brands that have copied the public schematics
  • Optimized timing for each motherboard version
  • Easy programming via JTAG
  • JTAG CK3 Power Plug Included for LPT (JP4)
  • Power LED
  • Reset Cycle Debug LED
  • Easy Install (Includes All Wires)
  • Works perfectly with the world famous NANDX, J-R Programmer & DemoN
  • QSB Add-Ons Available
  • Trusted Team Xecuter Design & Warranty

To extract the CPU_KEY for Slim consoles running dashboards higher than 2.0.14719 you will need the CR3-DGX v1.0s Add-on. Sold separately.


This product is designed primarily for the purpose of installation and development of alternative legal operating systems e.g. the Free60 Xbox Linux Project (http://free60.org/LibXenon), to aid or assist in the repair or replacement of defective hardware or for the use of and development of legal homebrew open source software. It does not enable any kind of piracy or include any code whatsoever that circumvents any kind of protection. We do not support nor encourage potential infringements of others' intellectual property rights - please do not contact us with any question related to this use as we will not respond.

UF.L / UMCC Cable available to buy separately

38%
: *
: *
: *
Type the characters you see in the picture:


*
 
Xbox 360 Flashing Red Light Repair Xecuter 2.6 CE Xecuter LT Switch 1.6
$59.95
$19.95
$2.95

Product rating

Sign in to rate

Customer Reviews

There have been no reviews for this product.
No news available at the moment
This was my life's first online order! Obviously tensed about it as I messed up with my shipping address. But they corrected it according to my mail the very next day and shipped with tracking number within a day!
I am just overwhelmed with their such good service and what I think, after this online shopping would be an addiction for me.

Thanks to modchipcentral!
Fahad Akter
(Home)

View All Testimonials

Write Your Own Testimonial
Latest Products RSS Feed
Bestselling Products RSS Feed
Featured Products RSS Feed
Specials RSS Feed