Home > Manufacturers > Team Xecuter

Team Xecuter

Team Xecuter

ModChipCentral.com are official resellers for Team Xecuter products! Rocking The Xbox Since 2002!

Products

  •  per page
Double Shielded Pro CPU_RST Cable PHAT or SLIM
SKU: cpuresetcbl

Improve your RGH boot times with this professionally manufactured Double Shielded 50Ω (ohm) grounded cable for the CPU_RST point.

OUT OF STOCK

Sign in to rate

Our price: $3.95
Market price: $6.99 save 43%
Hard Drive Case for Xbox 360 Slim
SKU: slimcase

When your Xbox 360 hard drive case is broken, you can change it easily with this Microsoft Xbox 360 Slim hard disk drive case. Great protection for brand new Xbox 360 Slim HDD with 250GB logo. Best replacement for your old, damaged, broken hard drive case. 100% new with high quality.

Sign in to rate

Our price: $9.95
Market price: $14.99 save 34%
Quantity
Xecuter CoolRunner CPU RESET Cleaner
SKU: coolrunnercpurst

Using input and R&D from their experienced forum members, wehave designed this very nice addon board which improves the signal quality of the CPU_RST line. This addon allows the user to easily select resistor Combos of 1K, 2K and 3.3K, and capacitor combos of 470pF, 560pF and 680pF. These are all of the values that gave the very best performance results (many users reported not being able to glitch at all, to a glitch time of 10 seconds!) . Moreover, the addon can be used on all Xilink CoolRunners and all other Xilink Boards on both Phat and Slim version installs.

Sign in to rate

Our price: $4.95
Market price: $6.95 save 29%
Quantity
Xecuter CoolRunner QSB V3 Monitor / Comms USB Cable
SKU: qsbcommscable

These are the cables used in conjunction with the v3 QSB’s to grab the CPU key into J-Runner.

Sign in to rate

Our price: $9.95
Market price: $12.95 save 23%
Quantity
Xecuter CoolRunner Rev C Mega Bundle #1
SKU: coolrunnerbundlerevc1

Save big $$$ by purchasing a bundle!

Sign in to rate

Our price: $29.95
Market price: $39.95 save 25%
Xecuter CoolRunner to CR3 Lite Add-on Pack
SKU: coolrunneraddonpack

All the required add-ons for the TX CoolRunner to convert to a TX CR3 LITE!

Convenience package with great savings!

Sign in to rate

Our price: $14.95
Market price: $19.95 save 25%
Quantity
Xecuter Corona 4GB NAND RW Kit V4
SKU: corona4gbnand

A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND. Simply solder the QSB and connect the SD adapter to your computer. Features: Fast Read/Write of a Corona 4GB model NAND (aka Corona v2)

IN STOCK

Sign in to rate

Our price: $14.95
Market price: $16.95 save 12%
Quantity
Xecuter CORONA QSB Upgrade
SKU: coronaqsbupgrade

For those who wish to try the recently released Corona16 code for XC2C64A based CoolRunners, Team TX have designed a clean and simple QSB solution so you can easily upgrade with no mess and no fuss.

It is compatible with all versions of the TX X2C64A CoolRunner and also has adapters for easy plug n play of the NDX, JR Programmer v1 and JR Programmer v2.

IN STOCK 

Sign in to rate

Our price: $9.95
Market price: $19.95 save 50%
Quantity
Xecuter CR3 CR3/DGX/RGX IPEX (U.FL) CPU Reset Cable
SKU: cr3cpuresetcable

Team Xecuter has provided an alternative way to connect the CPU_RST.

Cable attaches directly to CR3 Lite.

Sign in to rate

Our price: $3.95
Market price: $6.95 save 43%
Quantity
Xecuter CR3 Pro V1.0S (CORONA V3/V4) FAKE POST - Starter Kit
SKU: cr3procoronav3v4

After several months of development, and now after an exhaustive test run, the CR3 Pro is ready for public consumption.

The CR3 Pro is targeted towards experienced modders who want the highest RGH performance possible and the ability to tune their settings to an extreme level!

Sign in to rate

Our price: $34.95
Market price: $69.95 save 50%
Xecuter CR4 XL for 360 SLIM & PHAT! RGH2+/RJTAG+/JTAG
SKU: cr4xl01

Fewer wires, smaller form factor, completely redesigned method of glitching. Twice as fast as the fastest glitchers available - yes, including Slim proto. Incredibly stable - the worst boxes were glitched and tested, and found in less than 3 cycles (even with Slim Proto or CR3 Pro they wouldn't boot AT ALL). 95% of boxes instaboot!

IN STOCK!!! ON SALE $24.95

NOTE:  FOR PHAT CONSOLE INSTALLS WE SUGGEST USING THE MATRIX GLITCHER V2 OR V1 & PROGRAMMER.  OUR TECH FOUND THESE TO WORK WAY BETTER:

MATRIX GLITCHER

 

 

 

 

Sign in to rate

Our price: $24.95
Market price: $39.95 save 38%
Quantity
Xecuter DemoN
SKU: demon

Xecuter DemoN is the newest DUAL NAND solution for the PHAT XBox 360's as well as the SLIM consoles. CoolRunner, RGH 2.0, and more. Have 2 NAND  - for Xbox live (typically) and the other for a modified dashboard to run homebrew / custom code.

IN STOCK  

 

 

Sign in to rate

Our price: $39.95
Market price: $69.95 save 43%
Quantity
Xecuter DemoN Corona 16MB Converter QSB
SKU: demoncoronaqsb

Easily convert a TX DemoN Slim so it can be installed to a Corona motherboard without lots of different wires and difficult soldering.

Sign in to rate

Our price: $2.95
Market price: $9.95 save 70%
Xecuter Demon Phat
SKU: demon1

ALL DEMON PHAT SB 16MB NAND 

Xecuter DemoN is the newest DUAL NAND solution for the PHAT XBox 360's

IN STOCK ON SALE 

Sign in to rate

Our price: $39.95
Market price: $69.95 save 43%
Quantity
Xecuter DemoN Phat QSB V1
SKU: demonphatqsbv1

Xecuter DemoN Phat QSB V1

Easy to install!!!

Sign in to rate

Our price: $1.95
Market price: $4.95 save 61%
Quantity
Xecuter J-R Programmer Speed Upgrade QSB
SKU: jrprogspeedqsb

QSB for JR Programmer v1.0 - upgrade to v1.1 speed boost.

IN STOCK

Sign in to rate

Our price: $4.95
Market price: $6.99 save 29%
Quantity
Xecuter J-R Programmer v2
SKU: jrprog2

The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.

IN STOCK!!! 

Sign in to rate

Our price: $24.95
Market price: $39.95 save 38%
Quantity
Xecuter Nand-X QSB Install Cable
SKU: nandqsbcable

This is the Nand-X QSB Install cable that is included in all Nand-X kits. It is the #4 cable that is noted in all of the Xecuter installation guides.

Perfect for those that have lost or damaged their original cable.

Fits the QSB of both Phat and Slim consoles.

IN STOCK

Sign in to rate

Our price: $4.95
Market price: $6.95 save 29%
Quantity
Xecuter Sonus 360 - Corona QSB Kit
SKU: sonus360qsbcorona

The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!

Sign in to rate

Our price: $6.95
Market price: $9.95 save 30%
Quantity
Xecuter Sonus 360 - PHAT QSB
SKU: sonus360qsbphat

The Xecuter Sonus 360 (Phat) essentially allows you to program a different sound for power on, power off, eject and even rgh glitch to your Xbox 360 Phat – No longer is this cool feature restricted to just Xbox 360S Limited Edition Consoles – yet another groundbreaking first from Team Xecuter!

Sign in to rate

Our price: $19.95
Market price: $24.95 save 20%
Quantity
Xecuter Sonus 360 - Speaker Upgrade Kit
SKU: sonus360speaker

The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!

IN STOCK

Sign in to rate

Our price: $12.95
Market price: $16.95 save 24%
Quantity
Xecuter Sonus 360 - Trinity QSB Kit
SKU: sonus360qsbtrinity

The Xecuter Sonus 360 essentially allows you to program a different startup sound to your Xbox 360 !

IN STOCK

Sign in to rate

Our price: $6.95
Market price: $9.95 save 30%
Quantity
Xecuter X-Clamp / XClamp Removal Tool
SKU: xclamp

The Xecuter X-Clamp removal tool is the quickest and safest way to remove the X-Clamp.

OUT OF  STOCK ORDER THE TX UNLOCK TOOL KIT, COMES WITH A FREE X-CLAMP

Sign in to rate

Our price: $4.95
Market price: $9.95 save 50%
Quantity
Xecuter XBox 360 RROD Repair Kit - Extreme Edition
SKU: rrodextreme

The XECUTER XBOX REPAIR KIT – EXTREME EDITION includes all tools needed to perform the best at-home DIY repair to your Xbox 360 without having to ship it off for an expensive reball. This fix has become the defacto solution in repairing the majority of the RROD (red Ring Of Death) Xbox 360’s.

Sign in to rate

Our price: $29.95
Market price: $38.95 save 23%
Xecuter xFAN with GREEN LED
SKU: xfangreen

The Xecuter xFan is the next level in Xbox 360 cooling with high stability. The famous Team Xecuter have once again developed a solution to a very common problem on the older Xbox 360 consoles - the dreaded 2 x Red Lights and Overheating / Game Freezing issues.

Sign in to rate

Our price: $29.95
Market price: $39.95 save 25%
Xecuter RROD 360 PRO Repair Kit II
SKU: rrod
This is the new and latest version of our amazingly popular Xbox 360 RROD (Red Ring Of Death) Repair Kit.

After much testing Xecuter have designed and perfected the exact specifications for the our own unique version of the famed X-Clamp fix – including custom made K-Pads for the memory chips and for extra cooling, two custom designed additional heatsinks are included for installation on both the southbridge and ANA Scaler chips (Solves most E74) . Each replacement screw has been designed to fit perfectly with the original Xbox 360 motherboard removing any need for drilling or unwanted warping.
Sign in to rate

Our price: $24.95
Market price: $32.95 save 24%
Xecuter X2.6 CE Programmer
SKU: x26prog

Program your Xecuter 2.X Yes even the 2.6 Lite and solderless combo chips with ease.

Supports USB & Parallel Connections (comes with a usb cable, but you still need LPT cable, unless you are going to plug this directly into the LPT port on your computer)

Works on other LPC type modchips with little modification.

IN STOCK

Sign in to rate

Our price: $9.95
Market price: $24.95 save 60%
Xecuter NAND-X To CoolRunner JTAG Cable
SKU: nandtocool

Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.

Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)

IN STOCK

Sign in to rate

Our price: $6.95
Market price: $7.95 save 13%
Quantity
Xecuter Liteon DG-16D4S - Unlocked Replacement PCB V1.1
SKU: unlockedpcb11

Enables/disable write protect for Liteon DG-16D4S Drives (also 0225) DVDs. High quality, easy installation!

IN STOCK 

Sign in to rate

Our price: $29.95
Market price: $59.95 save 50%
Quantity
Xecuter Sputnik360 Liteon DG-16D4S Slim DVD Unlock Probe
SKU: sputnikprobe

The SPUTNIK360 Unlock Probe is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Sign in to rate

Our price: $12.95
Market price: $19.95 save 35%
Xecuter Sputnik360 Liteon DG-16D4S Slim DVD Unlock Switch
SKU: sputnik360

The SPUTNIK360 is a simple device that disables the write protect on any Liteon DG-16D4S drive that has the MXIC SPI flash device so you can easily repair or replace your faulty DVD drive with this model and have the ability to program your consoles DVD key.

Sign in to rate

Our price: $5.95
Market price: $9.95 save 40%
Quantity
Xecuter Sputnik360 SPI Unlock Probe PCB add-on
SKU: sputpcb

The SPUTNIK360 SPI Unlock Probe PCB Addon has been designed so that you never have to solder/unsolder the trace cut again.

Sign in to rate

Our price: $1.95
Market price: $2.49 save 22%
Quantity
Xecuter LT Switch 1.6
SKU: ltswitch

This is the new 4 position resistor - 4th value details will be added shortly.

This is the new Xecuter LT Switch v1.6 - the latest version in the #1 selling Xecuter LT Switch range.
Xecuter has designed a simple switch for all the Liteon drives that enables firmware full read/write. They have also included an ON/OFF Led to show correct operation when switching to 0x72 vendor mode.
Now Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor - so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

The installation is very simple and takes about 5 minutes if you have some small experience with a soldering iron. It has been tested with the latest Jungle Flasher 0.1.73. All Liteon drive versions have been tested with 100% Success (Including the troublesome Winbond IC). There is no need to remove the LT Switch after it has been installed - simply switch to normal mode and you are good to go. Even if you have to upgrade in the future - you don't have to touch the switch again !
Don't be fooled by more expensive copycat products. This is the only solution you need to do a very simple job. Remember this product follows the K.I.S.S engineering principle (KEEP IT SIMPLE STUPID) :)
The Only Liteon Solution Recommended By Team Jungle !
Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
Easy & Simple Install - Install Once & Forget
Enable / Disable Switch
Multi-R Switch (18, 20, 22 Ohms)
On/Off LED
Completely Undetectable
No Need To Uninstall
Works with ALL tools including the latest Jungle Flasher


This device is designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity.

Sign in to rate

Our price: $2.95
Market price: $3.95 save 25%
Quantity
Xecuter CK3 Lite Case
SKU: litecase

After several design selections by the community, Xecuter have finally released a superbly designed case for the CK3 Lite.

Easy to fit with separate parts for the Eject & Modeb buttons along with a toggle switch, a superb little buy if you already own a CK3 Lite.

A precision built design with the quality that you expect from Team Xecuter

Sign in to rate

Our price: $3.95
Market price: $6.95 save 43%
Quantity
Xecuter CK3 Pro Case
SKU: procase

After several design selections by the community, Xecuter have finally released a superbly designed case for the CK3 Pro.

Easy to fit with separate parts for the Eject & Modeb buttons along with a toggle switch, a superb little buy if you already own a CK3 Pro.

A precision built design with the quality that you expect from Team Xecuter

Sign in to rate

Our price: $3.95
Market price: $5.95 save 34%
Quantity
Xecuter CK3 to NAND-X Update Cable
SKU: ck3tonand

Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner over USB.

Note: The CK3 Pro (Rev D) requires a 1 wire modification (Older CK3 Pro and CK3i do not require this. Not compatible with CK3 Lite)

Sign in to rate

Our price: $4.95
Market price: $5.95 save 17%
Quantity
Xecuter CK3 XT Molex Adapter
SKU: xtadapter
Tired of having your PC Case open so you can connect your Molex Power & Sata cables to your CK3 (Connectivity Kit 3) ? This is a very useful adapter to keep all your CK3 power and sata cables neat and tidy.

Simply connect to on of your spare PC case slots and connect internally to a SATA port and to a Molex power supply.

External Molex power cable included.
Sign in to rate

Our price: $4.95
Market price: $7.95 save 38%
Quantity
Xecuter Liteon DG-16D4S - Unlocked Replacement PCB
SKU: 0225solution

Replaced by the 1.1 version: http://www.modchipcentral.com/store/product.php?productid=17811

Enables/disable write protect for Liteon DG-16D4S Drives (also 0225) DVDs. High quality, easy installation!
Sign in to rate

Our price: $54.95
Market price: $74.95 save 27%
Xecuter CK3 Extended Power / Probe Cable
SKU: convcable1

This extended power cable can be used with the CK3 Pro or CK3 Lite as an easy way to give yourself much extra room when working with your drives. The cables are high quality and nicely shrink wrapped to make everything as neat and secure as possible.

The CK3 Extended Power Cable is is 18 inches in length. This cable is for the CK3 Pro or CK3 Lite only, and supports the Mini probe, probe v1, Probe v2. This cable does not support Probe v3.

Sign in to rate

Our price: $3.95
Market price: $9.95 save 60%
Quantity
Xecuter CoolRunner Xilinx LPT JTAG Cable
SKU: lptcable

This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)

Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.

Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.

Sign in to rate

Our price: $12.95
Market price: $14.95 save 13%
Quantity
Xecuter POST QSB V1 For Xbox 360 Slim
SKU: slimpostqsb

Want to simplify sorting the boot times on Slims, the Xecuter QSB Slim Post is the board you want.

Sign in to rate

Our price: $1.95
Market price: $5.95 save 67%
Quantity
Xecuter LT Clip and LT Switch v2
SKU: ltswitch2

Xecuter have released the latest in their line of LT Switch Liteon DVD mod products, the LT Clip + LT Switch v2.

This kit has been designed with the beginner in mind. It's been in development for a while due to the absolute precision and stability needed to make sure it works for the the lifetime of the DVD Drive with no soldering or glue for trace repairs. There is even included a built in continuity tester to make sure your trace cuts are perfect !

Also Includes MULTI-R Function. After the discovery that a small number of Liteon drives would not dump the fw with a 20 ohm resistor - but required an 18 Ohm or 22 Ohm resistor -  so you can now select between 18, 20 and 22 Ohms ! (Default should be set to 20 Ohms - this will work 99% of the time)

This is the first and only Liteon solution where there is 100% No Soldering & No Glue - The fastest and easiest "MRA Hack" product on the market.

The Only Liteon Solution Recommended By Team Jungle !

  • Unique designed clip
  • No Solder & No Glue
  • External LT Switch
  • Built in continuity tester to make sure your trace cuts are perfect
  • Enables Read/Write on ALL Liteon 74850, 83850, 93450 DVD Drives
  • Easy & Simple Install - Install Once & Forget
  • Enable / Disable Switch
  • Multi-R Switch (18, 20, 22 Ohms)
  • On/Off LED
  • Completely Undetectable
  • Requires Xecuter CK3 Pro or Xecuter CK3 Lite to connect the LT Switch v2 to the Liteon DVD Drive
  • No Need To Uninstall
  • Works with ALL tools including the latest Jungle Flasher
  • Full Installation Tutorial - CLICK HERE
Sign in to rate

Our price: $9.95
Market price: $12.95 save 23%
  •  per page
No news available at the moment
Awsome service, got my Wasabi 360 in 2 days. And bought an Xkey last Friday, coming in tomorrow!
Jared A
(http://www.obomasmods.webs.com)

View All Testimonials

Write Your Own Testimonial
Latest Products RSS Feed
Bestselling Products RSS Feed
Featured Products RSS Feed
Specials RSS Feed