Back in stock on or around Monday, February 13.  Your credit card will not be charged until it ships.

This Ultimate PS3 Downgrade Device - will allow you to downgrade ANY PS3 from 4.00 to 3.55!

This device will just be solderless for consoles with NOR flash, not NAND at the moment

• Click here to check FAT models
• Click here to check Slim models. Please note that newer slim models cannot be downgraded, check this list

Here is a great installation video:

This is what the E3 flasher comes with. If you see someone selling it for cheaper, it is because they do not include everything:

PLEASE NOTE: This device will require you to simply open up your SLIM PS3 to take the HD out and solder. For the FAT PS3 you WILL require soldering!  As well, the plug that they include with the sata dock is not North American.

This PACKAGE we are selling will include: E3Flasher, FREE ESATA Station (for the HardDrive) & FREE PS3 Slim Switch
 

Please double check to make sure it works with your PS3 as we will not accept refunds if it is not compatible with your PS3 after it has been installed.

Watch the Official E3DIY Video: CLICK HERE

NOR FLASH ON board
3 save MODE
1 KEY backup or restore, simplicity is best
Compatible with all PS3 console - FAT models require soldering
Integrated interface varieties, perfect extension, will have more functions with future E3 accessories

IN STOCK - use the coupon code progskeet and get 50% off of shipping!

Here is some great information on using the Progkseet:  http://www.ps3devwiki.com/index.php?title=Progskeet#ProgSkeet_Tutorials

If you want a solderless clip with it, we have them for sale as well!

THE PROGSKEET BAREBONE PCB
Your one and only solution to your FLASING NEEDS…
Description:
1- Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
2- Blazing fast read/write speed!
3- Beside software-side updates, you can also expect hardware updates powered by customer requests!
4- With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
5- Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
6- Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
And always remember - for accuracy and speed, choose ProgSkeet!

SOME KIND OF DEVICES SUPPORTED (only for study and backup purpuse):
XBOX360 ALL NAND SUPPORT (ALL MODELS)
PS3 ALL NAND AND NOR FLASHES SUPPORT (ALL MODELS)
WII NAND CONSOLE (ALL MODELS)
PSP NAND CONSOLE (ALL MODELS)
ANY NAND OR NOR (CAR MARKET, HANDY PHONES etc, just send us a sample of the NAND and we can add in 1 hour the support to read and write it FOR FREE!)
TRANSFER SPEED: 1MB/sec (ex. about 16 sec. to read or write a whole PS3 Slim NOR flash)
 

360-NOR-clip 50pin x1
50pin FPC x2
Testing pin-out PCB x1

Please keep in mind these clips are almost a 1 time install.  When you keep taking the clip on and off, the pins don't spring back out all the way on the bottom of the clip so make sure the clip is perfectly flush with the board before you press it on.

IN STOCK

Unlock the true potential of your PS3 with True Blue – keep your PS3 on a homebrew enabled custom firmware, open up your console to a new generation of homebrew applications.

It can be used for software development and with open source, free software like FTP sever, backup manager, media player and other homebrew applications. The True Blue (aka PS Jailbreak 2) is Fully Plug and Play, updatable USB Chipset. The True Blue dongle is shipped empty, without any sofware. True Blue features:

IN STOCK

* Deal with a North American supplier, not a supplier from Asia where you might receive a clone or have to wait 3-4 weeks for it to arrive. We have stock ready to ship and you can receive yours in 2-5 business days!

th all HEX and as a bonus with PC AND MAC all for a blow away low price!

Include 4MB on board memory ! This is the BEST device period!
For LEGAL reasons E3 soldemprty as multi card reader, you must visit hacking website to update if your using for jailbreak - down grader use. -

CLICK HERE for hacking files

How to downgrade firmware 3.42/3.50 or above to firmware 3.41 with E3 Card Reader - Will not work on any other card :


1. Insert E3 Card Reader device that has been reprogrammed as downgrader into your console
2. Turn on the console using the same boot method as all other jailbreaks: Press power then immediately press eject. Your console will turn on and E3 Card Reader will light up red LED followed by blue LED
3. Turn off system via menu
4. Remove E3 Card Reader dongle and turn on console to make sure you are in Factory Service Mode. You will see a huge red box on the screen saying Factory Service Mode.
5. Load any blank FAT32 USB flash drive device with 2 files in the root directory:

1. Modified 3.41 PUP 2. Lv2Diag.self (File 1)
6. These must be the only files on the USB key and must be placed in the main (root) directory.
7. Insert flash drive into the last USB port to the right — the first USB port in from the right side if you’re facing the console. Turn the PS3 on and you will see black screen but the PS3 HDD light will flash.
8. The process takes 3-4 minutes for the system to install the old firmware. Towards the end, the power button on the console will start flashing green and then your console will power off.
9. Remove the flash drive and turn on the console, you will still be in Factory Service Mode. Please verify you have downgraded successfully to version 3.41 by going to "System Information".
10. (Optional) – If you wish to downgrade to any older firmware you can follow step 4, 5, 6 using any regular firmware PUP. (You do not need to use modified custom firmware now that you are on 3.41).
11. Insert USB flash drive back into your PC and delete the PUP and Lv2Diag.self file (File 1) and copy the other Lv2Diag.self (File 2) to the root of the flash drive. 12. Insert USB flash drive back into the same USB port on the PS3 and power on your PS3. After 10 seconds it will power off.
13. Remove USB flash drive and turn on your console again. You will be out of factory service mode and back in retail mode with your chosen firmware version installed. You will need to go through setting up settings configuration.

A very powerful Open Source PS3 Jailbreak dongle at an unbeatable price!

• 4M programable onboard FLASH - Accessed as 4M USB driver

• 32bit processor with 128K flash. Has strong processing rate and high expansion space

• Supports homebrew & back-up manager

• MicroSD SDHC supported, can load software and homebrew from it

• SUPPORTS Multi-System WinXP/Vista/Win7/Mac OS/Linux, this is a Multi-System Super-Drag-Drop Upgrade - nothing more than a file copy!

• Super-Drag-Plug upgrade mode - just copy BIN file and paste into e3 card. Takes a few seconds to finish upgrading - no need for any extra upgrader

• Dual firmware booting mode, this means hermes v4b and kakaroto latest firmware integrated into one code, and you can use any of them by yourself , no need to re-flash code

• Support any free PSGROOVE Hex like hermes & kakaroto

• E3card reader has CE, FCC and RoHS certification , it is a more safer and environmentally friendly product

• Comes with 1 year Manufacturer's Warranty

PS3 Laser KES-400A Replacement Laser Lens

Description:
Replacing your old or damaged PS3 Laser to correct laser problems

PS3 Laser Problem Diagnostics:
Games take much longer to load than normal
Certain games do not load
DVD movies flicker or jump
Message on screen "Disc Read Errors" or disc appears damaged or dirty on the screen.

Sony PS3 Laser Lens

Model: KES-400A

Compatibility: Sony Playstation3

Sony PS3 KES-400A Replacement Laser lens

Replace your damaged or worn out PlayStation 3 KES-400A laser

IN STOCK

• Sony PS3 Laser Lens
• Model: KES-450A
• Compatibility: Sony Playstation3 Slim Console
• Sony PS3 KES-450A Replacement Laser lens
• Replace your damaged or worn out PlayStation 3 KES-450A laser

 PS3 Laser Problem Diagnostics:
Games take much longer to load than normal
Certain games do not load
DVD movies flicker or jump
Message on screen "Disc Read Errors" or disc appears damaged or dirty on the screen.

IN STOCK

Buy PS3 Key Silabs

Plug&Play device.

Compatible with all PlayStation 3 Slim and FAT with 3.41 firmware version.

Compatible with all regions: NTSC, PAL, JAP, KOREA

Automatic disables system updates to avoid bricking.

100% Updatable

Simple and intuitive usefull manager.
Includes serial number for registering the product in www.ps3key.com

IN STOCK

Product Description

IN STOCK

With no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price.
AVRKey USB Dev Kit, start to develop on the Atmel Family of products!

Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!

Also some useful AVR USB Development Websites:

* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com

* Atmel FLIP Software Drivers - CLICK HERE

* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.

New Version of Maximus AVRUSB, the Maximus AVRUSB 1.2 comes with OPTIONAL Case and standard USB plug Atmel AT90USB162 version

IN STOCK 

Clear case for Minimus AVR / 32

IN STOCK 

Comes with 22 I/O breakout solder pads points so you can even do more development with this unit!

With the AT90SUSBKEY not being available and other products not being available, we will be stocking this product for those that will enjoy an ATMEGA AVR USB Dev Kit!

Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.

The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

* ATMEL AT90USB162
* 22 Programmable I/O Lines
* 16Kbyte Flash
* 512 Byte SRAM
* 512 byte EEPROM
* 16 MIPS Throughput
* USB 2.0 High Speed
* 5V USB Powered
* 16MHz Quartz Crystal Oscillator Circuit
* Power / Status LED's
* Male USB Connector - No Cable Required
* Access to all IO's
* Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
* Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
* Full LUFA Compatability
* Full LibUSB Compatability
* Simple Plug n Play
* High Quality production quality at the famous Xecuter factory.

Here are some development resources for AVR USB Development:

* AVR-USB-162 blink LED demo code (C source and HEX)
* AVR-USB-162 button demo code (C source and HEX)
* AVR-USB-162 frequency generator (C code and HEX)
* AVR-USB-162 mouse demo code C source
* AVR-USB-162 virtual COM port demo code C source
* MyUSB LGPL USB stack from Dean Camera

Also some useful AVR USB Development Websites:

* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com

* Atmel FLIP Software Drivers - CLICK HERE