IN STOCK
IN STOCK
IN STOCK
IN STOCK
IN STOCK
IN STOCK
IN STOCK
Black case for Minimus AVR / 32
Team Cobra has released the Cobra DMC module, which allows Cobra ODE versions Slim to work on PS3 consoles running v4.66OFW!
DOES NOT WORK ON PHAT VERSIONS OF PS3 WITH THE 400 LASER IN BLUERAY DRIVE
IN STOCK
IN STOCK
NOT IN STOCK
These are also included in the E3 Flasher Ltd. Edition complete kits.
Great on/off switch for slim PS3 consoles.
Clear case for Minimus AVR / 32
IN STOCK
IN STOCK
IN STOCK
HC SR501 Adjust Infrared IR PIR Motion Sensor Detector Module Security Motion
Dimension: 3.2cm x 2.4cm x 1.8cm (approx)
Infrared sensor with control circuit board
The sensitivity and holding time can be adjusted
IN STOCK
With no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price.
AVRKey USB Dev Kit, start to develop on the Atmel Family of products!
Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
Presenting Minimus 32, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus 32 AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
IN STOCK
Comes with 22 I/O breakout solder pads points so you can even do more development with this unit!
With the AT90SUSBKEY not being available and other products not being available, we will be stocking this product for those that will enjoy an ATMEGA AVR USB Dev Kit!
Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
* ATMEL AT90USB162
* 22 Programmable I/O Lines
* 16Kbyte Flash
* 512 Byte SRAM
* 512 byte EEPROM
* 16 MIPS Throughput
* USB 2.0 High Speed
* 5V USB Powered
* 16MHz Quartz Crystal Oscillator Circuit
* Power / Status LED's
* Male USB Connector - No Cable Required
* Access to all IO's
* Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
* Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
* Full LUFA Compatability
* Full LibUSB Compatability
* Simple Plug n Play
* High Quality production quality at the famous Xecuter factory.
Here are some development resources for AVR USB Development:
* AVR-USB-162 blink LED demo code (C source and HEX)
* AVR-USB-162 button demo code (C source and HEX)
* AVR-USB-162 frequency generator (C code and HEX)
* AVR-USB-162 mouse demo code C source
* AVR-USB-162 virtual COM port demo code C source
* MyUSB LGPL USB stack from Dean Camera
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
• Works as an ON-OFF switch like the one on the back of a PS3 Fat!
• Cool add-on for the PS3 Slim model!
• Makes it easier when using an USB Jailbreak dongle for the Slim PS3
IN STOCK
IN STOCK
IN STOCK
IN STOCK
For USA, Canada, Japan, China and other countries with same plug system. Connect your 220 volt power plug to 110 wall outlet.
IN STOCK
100% brand new and high quality.
Compatible with Win98/ME/2000/2003/XP/Vista/for Windows 7/for Windows 8.
Compatible with 32-bit and 64-bit computers.
Compatible with all for Mac Operating Systems.
Plug and Play, no extra drivers needed.
IN STOCK
IN STOCK
Since there is no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price but some people want the ATMEL Brand. This item is available via request only, so drop us an email and we will bring it in for you!
Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
SDHC cards offer larger volume data storage and optimized recording performance with support for FAT 32 file formats. In addition, Kingston's SDHC cards use new speed class ratings known as Class 2, 4 and 6 that deliver a minimum data transfer rate for optimum performance with SDHC devices.
Although identical in size to todays standard SD card, the new SDHC cards are designed differently and are only recognized by SDHC host devices. To ensure compatibility, look for the SDHC logo on cards and host devices (cameras, camcorders, etc.).
For added reliability and durability, Kingston's solid-state SDHC memory cards are built of nonvolatile memory components and have no moving parts that could wear out or break. All cards are 100-percent tested by the manufacturer.
- Color: Blue
- Material: PCB + plastic + copper
- Supports Google Android ADK function
- Supports Android mobile phones: G1, Nexus One, Nexus S, Motorola Droid X (Mobile phone OS should update to Android 2.3.4, tablet PC OS should update to Android 3.1)
- Compatibility: Arduino Uno 328, Arduino Diecimila/Duemilanove 328, Arduino Mega 2560 (suggestion), Arduino Mega 1280
- Great for DIY projects
IN STOCK
IN STOCK
IN STOCK
Overview
Don’t limit your projects, think big, think MEGA! The Arduino Mega 2560 has been designed with bigger and more ambitious projects in mind. The large number of analog and digital pins, together with a larger memory makes it ideal for devices like 3D printers and other demanding applications. Backward compatibility with existing shields and sketches is provided, but other shields target the Mega specifically, exploiting the full potential of this board.
IN STOCK
These are the special K-Pads that come with all TX RROD Pro Repair Kits.
There are 40 pcs in each pack (4 used on each Xbox 360 - so enough for 10 XBox's)Overview
Arduino Uno is the ideal board for getting started with electronics, through fun and engaging hands-on projects. This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs. Arduino Uno Rev3 is the most used and documented board in the Arduino family. Thanks to the lively and helpful community surrounding the Arduino Uno, no one will find themselves without support.
IN STOCK
IN STOCK
IN STOCK
IN STOCK
Have been ordering from Modchip Central for a few years now. It\'s the one and only place I use for modding. Uber fast shipping and I\'ve never once had any problem with any product ever! I love you guys!
Brian |
Brian |
View All Testimonials Write Your Own Testimonial |