IN STOCK
With no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price.
AVRKey USB Dev Kit, start to develop on the Atmel Family of products!
Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
Black case for Minimus AVR / 32
Clear case for Minimus AVR / 32
Presenting Minimus 32, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus 32 AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
IN STOCK
Comes with 22 I/O breakout solder pads points so you can even do more development with this unit!
With the AT90SUSBKEY not being available and other products not being available, we will be stocking this product for those that will enjoy an ATMEGA AVR USB Dev Kit!
Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.
The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.
* ATMEL AT90USB162
* 22 Programmable I/O Lines
* 16Kbyte Flash
* 512 Byte SRAM
* 512 byte EEPROM
* 16 MIPS Throughput
* USB 2.0 High Speed
* 5V USB Powered
* 16MHz Quartz Crystal Oscillator Circuit
* Power / Status LED's
* Male USB Connector - No Cable Required
* Access to all IO's
* Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
* Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
* Full LUFA Compatability
* Full LibUSB Compatability
* Simple Plug n Play
* High Quality production quality at the famous Xecuter factory.
Here are some development resources for AVR USB Development:
* AVR-USB-162 blink LED demo code (C source and HEX)
* AVR-USB-162 button demo code (C source and HEX)
* AVR-USB-162 frequency generator (C code and HEX)
* AVR-USB-162 mouse demo code C source
* AVR-USB-162 virtual COM port demo code C source
* MyUSB LGPL USB stack from Dean Camera
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
New Version of Maximus AVRUSB, the Maximus AVRUSB 1.2 comes with OPTIONAL Case and standard USB plug Atmel AT90USB162 version
IN STOCK
New Version of Maximus AVR USB, the Maximus AVRUSB 1.2 comes with Case and standard USB Connection, Also due to main IC shortage we are switching our design from ATMEL 16KB to a PIC8F4550 32KB processor, which has proven to be easier to program and just as reliable as ATMEL.
Since there is no more AT90SUSBKEY Device kits available, other solutions are coming forward at a reasonable price but some people want the ATMEL Brand. This item is available via request only, so drop us an email and we will bring it in for you!
Use the Atmel FLIP software to load your compiled homebrew and development applications (HEX) directly into this USB dev kit via a standard computer USB port, no additional Hardware required!
Also some useful AVR USB Development Websites:
* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com
* Atmel FLIP Software Drivers - CLICK HERE
* Software Compatible With Windows 9x / Me / NT / 2000 / XP / Vista / 7 and Linux.
For USA, Canada, Japan, China and other countries with same plug system. Connect your 220 volt power plug to 110 wall outlet.
• Works as an ON-OFF switch like the one on the back of a PS3 Fat!
• Cool add-on for the PS3 Slim model!
• Makes it easier when using an USB Jailbreak dongle for the Slim PS3
I got my SAVEMII the day after the purchase day and it works correctly!
A++++++ |
Raphaël |
View All Testimonials Write Your Own Testimonial |