NAND/JTAG/RGH
NAND/JTAG/RGH
This item is not and has never been designed to work with ANY other power source other then the XBox 360.
Xilinx Parallel Programmer based on the popular Cable III with red and green indicators.
This programmer is an affordable and great way to program your Xilinx chips.
Start programming the Xilinx line of products including CPLD's and FPGA's!
Simply plug the programmer into your parallel port on your PC, an the other end to your Xilinx chip.
New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?
This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.
You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.
ONLY fits TRINITY MOTHERBOARDS
We are proud to announce the MATRIX TRIDENT (PSI), the first TRIPLE NAND solution available for Xbox360.
The TRIDENT will transform your console 16 MB NAND in 3 independent 16 MB banks that can be read and write with any available SPI reader/writer solution using software tools like Nandpro 2.0 and Nandpro 3.0.
The trident can work together with any Glitcher solution present in the market.
A flat cable is supplied to directly connect it to the Matrix GLitcher II, for enhanced performances.
It features a quick solder board solution for the Trinity slim and an external switch with led indicators to quickly choose which one of the THREE banks of NAND to use.
With the Matrix Trident you can assign one bank to the Original NAND, the second bank to boot a dashboard and the third NAND bank to boot Xell or a second dashboard.
Maximus Stinger 3.0L JTAG Add-on board, compatible for glitching your Xbox360 PHAT or SLIM Tirinity
Introducing the newest JTAG Programmer v2.0 from team Squirt360! Now with on-board, an 8-BIT Power translator from 3.7V to 1.8V. This simple IC open the door to connect the SQUIRT FTDI interface to any device!
The all in one JTAG & SPI programmer.
Are you ready for the next generation of RGH chips? Fast, stable boots and super high quality! RGH1 and RGH2 support for your XBox360 PHAT and SLIM Trinity/Corona!
NEW VERSION 2.1!!
NEW Squirt 360 MICRO JTAG/Glitcher BGA Board v1.3 supporting Dual NAND! Works with SLIM and PHAT 360. RGH 2.0 compatible!
The Squirt 360 (CoolRunner + Squirt Programmer) all-in-one Glitch hack!
The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!
IN STOCK
This tool is a hardware solution to dump and flash the nand of 4GB Corona (a.k.a. Corona v2) motherboard because this kind of console are not compatible with the older nand dumping hardware (USB SPI) on the market.
These are the cables used in conjunction with the v3 QSB’s to grab the CPU key into J-Runner.
The ProgSKEET team have released their new programming USB board. Version 1.0 replaces the use of the older Infectus programmer and boasts speeds of up to two times faster than its predecessor. The ProgSKEET Programmer can be used for any ACTEL A3P device with support for AutoGG incoming.
The Soft QSB NOR board from Team ProgSkeet! For fast, cheaper, and stable installation of your Progskeet to NOR Chip.
use the coupon code progskeet and get 50% off of shipping!
Here is some great information on using the Progkseet: http://www.ps3devwiki.com/index.php?title=Progskeet#ProgSkeet_Tutorials
If you want a solderless clip with it, we have them for sale as well!
THE PROGSKEET BAREBONE PCB
Your one and only solution to your FLASING NEEDS…
Description:
1- Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
2- Blazing fast read/write speed!
3- Beside software-side updates, you can also expect hardware updates powered by customer requests!
4- With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
5- Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
6- Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
And always remember - for accuracy and speed, choose ProgSkeet!
SOME KIND OF DEVICES SUPPORTED (only for study and backup purpuse):
XBOX360 ALL NAND SUPPORT (ALL MODELS)
PS3 ALL NAND AND NOR FLASHES SUPPORT (ALL MODELS)
WII NAND CONSOLE (ALL MODELS)
PSP NAND CONSOLE (ALL MODELS)
ANY NAND OR NOR (CAR MARKET, HANDY PHONES etc, just send us a sample of the NAND and we can add in 1 hour the support to read and write it FOR FREE!)
TRANSFER SPEED: 1MB/sec (ex. about 16 sec. to read or write a whole PS3 Slim NOR flash)
Xecuter PHAT QSB v3 for JR programmer, NANDX and CR all in one simple QSB
IN STOCK
IN STOCK
This is the wires install cable for the NAND-X. Simply solder the wires to the correct points on the motherboard and plug into the NAND-X. Easy !
Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.
Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)
IN STOCK
This is the Nand-X QSB Install cable that is included in all Nand-X kits. It is the #4 cable that is noted in all of the Xecuter installation guides.
Perfect for those that have lost or damaged their original cable.
Fits the QSB of both Phat and Slim consoles.
IN STOCK
The 360 NandFlasher V1.2 from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip for you XB360
Cost effective NAND reader / programmer to complete the GliGli Hack.
It features a PIC18F2455 microcontroller for stable and quick reading/writing of all NAND models available on the different XBOX360 models.
Based on the GliGli Hack (a Reset type Glitch Hack), it works by sending precisely timed pulses to the console’s processor until the booting of unsigned code is successful. Once this has been achieved, XeLL, the Xenon Linux Loader is booted.
It works on Phat versions of the X360
(except Xenon motherboard) regardless of the Kernel version
Great for Glitching Phat consoles! Get the JRP V2 to program the Glitcher!
IN STOCK!
The MTX Freedom PCB is a full replacement for your Liteon DG-16D4S Drives PCB.
The latest LITE-ON DG16D5S and HITACHI DLN10N 0500/0502* solution from the Matrix Team!
*Hitachi DLN10N 0500/0502 drives are going to be compatible in a few days.
New Product from the Matrix team this is a LTU firmware modded PCB replacement for the DG-16D5S DVD drives found in the Xbox 360 slim model consoles.
This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)
Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.
Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.
QSB for JR Programmer v1.0 - upgrade to v1.1 speed boost.
IN STOCK
The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.
IN STOCK!!!
The ProgSkeet JTAG Injectus USB Programmer from the Infectus Team is the most advanced programmer for every ProgSkeet NAND / NOR / EEPROM USB Programmer or the ARGON and INFECTUS ModChip. It supports USB 2.0 and with the high professional programmer software can you easy reflash your ProgSkeet V1.0 and V1.1 or the ARGON chip. The ProgSkeet JTAG Injectus USB Programmer is the perfect complement for every ProgSkeet Developer!
IN STOCK
The external programmers for fine tuning Matrix Glitcher II performance and optional add-on to the Matrix FREEDOM and FREEDOM LITE PCB.
This is the Jasper Big Block NAND (256MB/512MB) Upgrade Kit for all DemoN Phat versions. Make sure you update DemoN to at least 1.04 firmware
IN STOCK
Easily convert a TX DemoN Slim so it can be installed to a Corona motherboard without lots of different wires and difficult soldering.
After several months of development, and now after an exhaustive test run, the CR3 Pro is ready for public consumption.
The CR3 Pro is targeted towards experienced modders who want the highest RGH performance possible and the ability to tune their settings to an extreme level!
Improve your RGH boot times with this professionally manufactured Double Shielded 50Ω (ohm) grounded cable for the CPU_RST point.
OUT OF STOCK
A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND. Simply solder the QSB and connect the SD adapter to your computer. Features: Fast Read/Write of a Corona 4GB model NAND (aka Corona v2)
IN STOCK
Using input and R&D from their experienced forum members, wehave designed this very nice addon board which improves the signal quality of the CPU_RST line. This addon allows the user to easily select resistor Combos of 1K, 2K and 3.3K, and capacitor combos of 470pF, 560pF and 680pF. These are all of the values that gave the very best performance results (many users reported not being able to glitch at all, to a glitch time of 10 seconds!) . Moreover, the addon can be used on all Xilink CoolRunners and all other Xilink Boards on both Phat and Slim version installs.
All the required add-ons for the TX CoolRunner to convert to a TX CR3 LITE!
Convenience package with great savings!
Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner over USB.
Note: The CK3 Pro (Rev D) requires a 1 wire modification (Older CK3 Pro and CK3i do not require this. Not compatible with CK3 Lite)
Adaptor board to connect to progskeet one or two NAND CLIP SOLDERLESS.
It is necessary for PROGSKEET ACTEL FIRMWARE SOLDERLESS. Injectus is necessary for the re-programming of ACTEL (13/10/2011)
Contents:
- 1x Adaptor PCB
- 1x 50 pin FCC 8 cm cable
- 2x 32 pin FCC 20 cm cables
IN STOCK
Perfect for increasing RGH boot time of Big Block Jaspers (256/512) and other problematic Phat Xbox's.
Quality ceramic coating guarantees high moisture resistance and a wide operating temperature range. Operating tolerance ± 10%.
0.068uF / 68nF Rating.