Home > Xbox 360 > NAND/JTAG/RGH

NAND/JTAG/RGH

NAND/JTAG/RGH

DemoN JASPER 256MB/512MB PHAT BB Upgade Kit
SKU: demonphatbbupgrade

This is the Jasper Big Block NAND (256MB/512MB) Upgrade Kit for all DemoN Phat versions. Make sure you update DemoN to at least 1.04 firmware

IN STOCK

Sign in to rate

Our price: $4.95
Market price: $14.95 save 67%
Double Shielded Pro CPU_RST Cable PHAT or SLIM
SKU: cpuresetcbl

Improve your RGH boot times with this professionally manufactured Double Shielded 50Ω (ohm) grounded cable for the CPU_RST point.

OUT OF STOCK

Sign in to rate

Our price: $3.95
Market price: $6.99 save 43%
Matrix CryptoCop Add-on 1175 DG-16D5S Solution
SKU: matrixcryptocop

The latest LITE-ON DG16D5S and HITACHI DLN10N 0500/0502* solution from the Matrix Team!

*Hitachi DLN10N 0500/0502 drives are going to be compatible in a few days.

Sign in to rate

Our price: $9.95
Market price: $24.95 save 60%
Quantity
Matrix External USB Programmer for Glitcher II / Freedom PCB
SKU: extprogmatrix

The external programmers for fine tuning Matrix Glitcher II performance and optional add-on to the Matrix FREEDOM and FREEDOM LITE PCB.

Sign in to rate

Our price: $14.95
Market price: $16.95 save 12%
Quantity
Matrix Freedom LITE Unlocked Replacement PCB DG-16D4S
SKU: matrixfreedomlite

The MTX Freedom PCB is a full replacement for your Liteon DG-16D4S Drives PCB.

Sign in to rate

Our price: $37.45
Market price: $59.95 save 38%
Matrix Freedom PCB XBox 360 SLIM LTU+ DG-16D4S DG-16D5S 1175
SKU: matrix1175pcb

New Product from the Matrix team this is a LTU firmware modded PCB replacement for the DG-16D5S DVD drives found in the Xbox 360 slim model consoles.

Sign in to rate

Our price: $49.95
Market price: $79.95 save 38%
Maximus 360 Nand Flasher V1.2 (PHAT)
SKU: maxnandflasher1.2

The 360 NandFlasher V1.2 from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip for you XB360
 

Sign in to rate

Our price: $19.95
Market price: $24.95 save 20%
Maximus SD Tool for Corona 4GB
SKU: sdtoolmaximus

This tool is a hardware solution to dump and flash the nand of 4GB Corona (a.k.a. Corona v2) motherboard because this kind of console are not compatible with the older nand dumping hardware (USB SPI) on the market.

Sign in to rate

Our price: $12.95
Market price: $19.95 save 35%
Maximus X-Power Add-on
SKU: xpower

This item is not and has never been designed to work with ANY other power source other then the XBox 360.

Sign in to rate

Our price: $7.95
Market price: $9.95 save 20%
ProgSKEET Programmer V1.0
SKU: progsktprogrammerv1

The ProgSKEET team have released their new programming USB board. Version 1.0 replaces the use of the older Infectus programmer and boasts speeds of up to two times faster than its predecessor. The ProgSKEET Programmer can be used for any ACTEL A3P device with support for AutoGG incoming.

Sign in to rate

Our price: $24.95
Market price: $29.95 save 17%
Quantity
PROGSKEET SOFT QSB NOR v001
SKU: progskeetsoftnorqsb

The Soft QSB NOR board from Team ProgSkeet! For fast, cheaper, and stable installation of your Progskeet to NOR Chip.

Sign in to rate

Our price: $19.95
Market price: $24.95 save 20%
Quantity
Squirt 360 JTAG/Glitcher BGA Board v1.2
SKU: squirt360glitch

The Squirt 360 (CoolRunner + Squirt Programmer) all-in-one Glitch hack!

Sign in to rate

Our price: $19.95
Market price: $24.99 save 20%
Squirt 360 MICRO JTAG/Glitcher BGA Board v1.3
SKU: squirt360glitch13

360squirt.com

NEW Squirt 360 MICRO JTAG/Glitcher BGA Board v1.3 supporting Dual NAND! Works with SLIM and PHAT 360. RGH 2.0 compatible!

Sign in to rate

Our price: $24.95
Market price: $39.95 save 38%
Quantity
Squirt 360 Programmer V2 - 8-bit Power Translator
SKU: squirtprogrammerv2

Introducing the newest JTAG Programmer v2.0 from team Squirt360! Now with on-board, an 8-BIT Power translator from 3.7V to 1.8V. This simple IC open the door to connect the SQUIRT FTDI interface to any device!

Sign in to rate

Our price: $24.95
Market price: $29.95 save 17%
Squirt 360 RELOADED BGA JTAG Board V2.1 100MHz Glitcher/RGH
SKU: squirt360jtagv21

Are you ready for the next generation of RGH chips? Fast, stable boots and super high quality! RGH1 and RGH2 support for your XBox360 PHAT and SLIM Trinity/Corona!

NEW VERSION 2.1!!

Sign in to rate

Our price: $19.95
Market price: $29.95 save 33%
Quantity
Squirt 360 Slave Programmer
SKU: squirt360slave

The all in one JTAG & SPI programmer.

Sign in to rate

Our price: $19.95
Market price: $34.95 save 43%
Xecuter CoolRunner CPU RESET Cleaner
SKU: coolrunnercpurst

Using input and R&D from their experienced forum members, wehave designed this very nice addon board which improves the signal quality of the CPU_RST line. This addon allows the user to easily select resistor Combos of 1K, 2K and 3.3K, and capacitor combos of 470pF, 560pF and 680pF. These are all of the values that gave the very best performance results (many users reported not being able to glitch at all, to a glitch time of 10 seconds!) . Moreover, the addon can be used on all Xilink CoolRunners and all other Xilink Boards on both Phat and Slim version installs.

Sign in to rate

Our price: $4.95
Market price: $6.95 save 29%
Quantity
Xecuter CoolRunner QSB V3 Monitor / Comms USB Cable
SKU: qsbcommscable

These are the cables used in conjunction with the v3 QSB’s to grab the CPU key into J-Runner.

Sign in to rate

Our price: $9.95
Market price: $12.95 save 23%
Quantity
Xecuter CoolRunner to CR3 Lite Add-on Pack
SKU: coolrunneraddonpack

All the required add-ons for the TX CoolRunner to convert to a TX CR3 LITE!

Convenience package with great savings!

Sign in to rate

Our price: $14.95
Market price: $19.95 save 25%
Quantity
Xecuter Corona 4GB NAND RW Kit V4
SKU: corona4gbnand

A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND. Simply solder the QSB and connect the SD adapter to your computer. Features: Fast Read/Write of a Corona 4GB model NAND (aka Corona v2)

IN STOCK

Sign in to rate

Our price: $14.95
Market price: $16.95 save 12%
Quantity
Xecuter CR3 Pro V1.0S (CORONA V3/V4) FAKE POST - Starter Kit
SKU: cr3procoronav3v4

After several months of development, and now after an exhaustive test run, the CR3 Pro is ready for public consumption.

The CR3 Pro is targeted towards experienced modders who want the highest RGH performance possible and the ability to tune their settings to an extreme level!

Sign in to rate

Our price: $34.95
Market price: $69.95 save 50%
Xecuter CR4 XL for 360 SLIM & PHAT! RGH2+/RJTAG+/JTAG
SKU: cr4xl01

Fewer wires, smaller form factor, completely redesigned method of glitching. Twice as fast as the fastest glitchers available - yes, including Slim proto. Incredibly stable - the worst boxes were glitched and tested, and found in less than 3 cycles (even with Slim Proto or CR3 Pro they wouldn't boot AT ALL). 95% of boxes instaboot!

OUT OF STOCK!!! ON SALE $24.95

NOTE:  FOR PHAT CONSOLE INSTALLS WE SUGGEST USING THE MATRIX GLITCHER V2 OR V1 & PROGRAMMER.  OUR TECH FOUND THESE TO WORK WAY BETTER:

MATRIX GLITCHER

 

 

 

 

Sign in to rate

Our price: $24.95
Market price: $39.95 save 38%
Xecuter DemoN Corona 16MB Converter QSB
SKU: demoncoronaqsb

Easily convert a TX DemoN Slim so it can be installed to a Corona motherboard without lots of different wires and difficult soldering.

Sign in to rate

Our price: $2.95
Market price: $9.95 save 70%
Xecuter J-R Programmer Speed Upgrade QSB
SKU: jrprogspeedqsb

QSB for JR Programmer v1.0 - upgrade to v1.1 speed boost.

IN STOCK

Sign in to rate

Our price: $4.95
Market price: $6.99 save 29%
Quantity
Xecuter J-R Programmer v2
SKU: jrprog2

The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.

IN STOCK!!! 

Sign in to rate

Our price: $24.95
Market price: $39.95 save 38%
Quantity
Xecuter Nand-X QSB Install Cable
SKU: nandqsbcable

This is the Nand-X QSB Install cable that is included in all Nand-X kits. It is the #4 cable that is noted in all of the Xecuter installation guides.

Perfect for those that have lost or damaged their original cable.

Fits the QSB of both Phat and Slim consoles.

IN STOCK

Sign in to rate

Our price: $4.95
Market price: $6.95 save 29%
Quantity
Xecuter PHAT QSB V3 JRP/NANDX/CR
SKU: phatqsbv3

Xecuter PHAT QSB v3 for JR programmer, NANDX and CR all in one simple QSB

IN STOCK

Sign in to rate

Our price: $9.95
Market price: $12.95 save 23%
Quantity
Xecuter Sonus 360 - Corona QSB Kit
SKU: sonus360qsbcorona

The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!

Sign in to rate

Our price: $3.00
Market price: $9.95 save 70%
Quantity
Xecuter Sonus 360 - Speaker Upgrade Kit
SKU: sonus360speaker

The Xecuter Sonus 360 essentially allows you to program a different startup sound and eject sound to your Xbox 360 Slim - yet another groundbreaking first from the famous Team Xecuter!

IN STOCK

Sign in to rate

Our price: $9.95
Market price: $16.95 save 41%
Quantity
Xecuter NAND-X To CoolRunner JTAG Cable
SKU: nandtocool

Use your NAND-X to program the Xecuter CoolRunner with the latest firmware over USB.

Note: The NAND-X must be updated to the new NANDPRO v3 (You can use your CK3 Pro and a CK3 to NAND-X Update cable to update the NAND-X to the latest version)

IN STOCK

Sign in to rate

Our price: $6.95
Market price: $7.95 save 13%
Quantity
Xecuter CK3 to NAND-X Update Cable
SKU: ck3tonand

Use your Xecuter CK3 Pro or CK3i to update your NAND-X firmware to the latest version NANDPRO so you can use your NAND-X to program your Xecuter CoolRunner over USB.

Note: The CK3 Pro (Rev D) requires a 1 wire modification (Older CK3 Pro and CK3i do not require this. Not compatible with CK3 Lite)

Sign in to rate

Our price: $4.95
Market price: $5.95 save 17%
Quantity
Xecuter CoolRunner Xilinx LPT JTAG Cable
SKU: lptcable

This is a custom made LPT JTAG Cable that is designed direct from the official Xilinx schematics (not the cheap design that is going around - this is the higher spec design from Xilinx)

Fully compatible with iMPACT software and tested 100% with various Xilinx products that have a JTAG port including the Xecuter CoolRunner.

Comes complete with an Xecuter CK3 custom power cable for the Xecuter CoolRunner while updating over LPT.

Sign in to rate

Our price: $12.95
Market price: $14.95 save 13%
Quantity
PROGSKEET V1.1 Crystal Blue - NAND and NOR reader/writer
SKU: progskeet

use the coupon code progskeet and get 50% off of shipping!

Here is some great information on using the Progkseethttp://www.ps3devwiki.com/index.php?title=Progskeet#ProgSkeet_Tutorials

If you want a solderless clip with it, we have them for sale as well!

THE PROGSKEET BAREBONE PCB
Your one and only solution to your FLASING NEEDS…
Description:
1- Whether it is NAND, NOR or any other kind of non-volatile memory - just solder, plug in and operate!
2- Blazing fast read/write speed!
3- Beside software-side updates, you can also expect hardware updates powered by customer requests!
4- With a broad range of applications, such as EEPROM programming (among others: Altera, Lattice FPGA/CPLD), Bad flash recovery, more commonly known as "Unbricking" (Modems, video cards, cell phones, music players) and plain serial programming (manufacture of your own device).
5- Supported devices include, but are not limited to: K9F1G08, S29GL128, K8Q2815, HY27US08.
6- Industrial programmers often range in the EUR 1000+ range with limited customer support. ProgSkeet can compete with these programmers all the while maintaining low cost!
And always remember - for accuracy and speed, choose ProgSkeet!

SOME KIND OF DEVICES SUPPORTED (only for study and backup purpuse):
XBOX360 ALL NAND SUPPORT (ALL MODELS)
PS3 ALL NAND AND NOR FLASHES SUPPORT (ALL MODELS)
WII NAND CONSOLE (ALL MODELS)
PSP NAND CONSOLE (ALL MODELS)
ANY NAND OR NOR (CAR MARKET, HANDY PHONES etc, just send us a sample of the NAND and we can add in 1 hour the support to read and write it FOR FREE!)
TRANSFER SPEED: 1MB/sec (ex. about 16 sec. to read or write a whole PS3 Slim NOR flash)
 

Sign in to rate

Our price: $59.95
Market price: $69.95 save 14%
68nF 50V Ceramic Capacitor
SKU: 68nfcap

IN STOCK

Perfect for increasing RGH boot time of Big Block Jaspers (256/512) and other problematic Phat Xbox's.

Quality ceramic coating guarantees high moisture resistance and a wide operating temperature range. Operating tolerance ± 10%.

0.068uF / 68nF Rating.

Sign in to rate

Our price: $0.18
PROGSKEET Adaptor PCB Kit
SKU: adaptorpcb

Adaptor board to connect to progskeet one or two NAND CLIP SOLDERLESS.

It is necessary for PROGSKEET ACTEL FIRMWARE SOLDERLESS. Injectus is necessary for the re-programming of ACTEL (13/10/2011)

Contents:

  • 1x Adaptor PCB
  • 1x 50 pin FCC 8 cm cable
  • 2x 32 pin FCC 20 cm cables
Sign in to rate

Our price: $9.95
Market price: $19.95 save 50%
Quantity
Matrix Trident
SKU: tridentmatrix

ONLY fits TRINITY MOTHERBOARDS

We are proud to announce the MATRIX TRIDENT (PSI), the first TRIPLE NAND solution available for Xbox360.

The TRIDENT will transform your console 16 MB NAND in 3 independent 16 MB banks that can be read and write with any available SPI reader/writer solution using software tools like Nandpro 2.0 and Nandpro 3.0.

The trident can work together with any Glitcher solution present in the market.

A flat cable is supplied to directly connect it to the Matrix GLitcher II, for enhanced performances.

It features a quick solder board solution for the Trinity slim  and an external switch with led indicators to quickly choose which one of the THREE banks of NAND to use.

With the Matrix Trident you can assign one bank to the Original NAND, the second bank to boot a dashboard and the third NAND bank to boot Xell or a second dashboard.

Sign in to rate

Our price: $34.95
Market price: $39.95 save 13%
Matrix Glitcher V1
SKU: matrixglitcher1

Based on the GliGli Hack (a Reset type Glitch Hack), it works by sending precisely timed pulses to the console’s processor until the booting of unsigned code is successful. Once this has been achieved, XeLL, the Xenon Linux Loader is booted.

It works on Phat versions of the X360
(except Xenon motherboard) regardless of the Kernel version

 

Great for Glitching Phat consoles! Get the JRP V2 to program the Glitcher!

IN STOCK!  

Sign in to rate

Our price: $18.95
Market price: $24.95 save 24%
Quantity
Xecuter USB to MOLEX 5V Power Cable
SKU: usbtomolex

New from Team Xecuter. Ever needed fast molex power and you can't get your hands on a power supply ?

This handy cable provides a full 5V from your USB port to a Molex connector giving you full power to be able to update the firmware on your 360 DVD Drive.

You can get the essential 5V supply for your 360 DVD Drive, the only thing you wont get is the 12V line for eject. Eject is only required when performing certain recovery procedures, but for the most part all you will ever need is the 5V - a great cable thats useful in any modders toolkit.

Sign in to rate

Our price: $2.00
Market price: $8.95 save 78%
Quantity
Injectus JTAG Programmer - NOW PROGSKEET PROGRAMMER V1.0
SKU: injectus

The ProgSkeet JTAG Injectus USB Programmer from the Infectus Team is the most advanced programmer for every ProgSkeet NAND / NOR / EEPROM USB Programmer or the ARGON and INFECTUS ModChip. It supports USB 2.0 and with the high professional programmer software can you easy reflash your ProgSkeet V1.0 and V1.1 or the ARGON chip. The ProgSkeet JTAG Injectus USB Programmer is the perfect complement for every ProgSkeet Developer!

IN STOCK

Sign in to rate

Our price: $24.95
Market price: $29.95 save 17%
Quantity
Xecuter Nand-X JTAG KIT #5 (NON_XENON ALT PRO VERSION)
SKU: jtag5

This is the JTAG kit that all pro-installers swear by. Known as "Kit #5" by those in the know as that was its code name during the NAND-X testing trials and it quickly gained a reputation as being the best kit available for all non-Xenon motherboards (Falcon, Zephyr, Opus, Jasper).

Sign in to rate

Our price: $6.95
Market price: $11.95 save 42%
Xecuter NAND-X Wires Install Kit
SKU: nandxwire

IN STOCK

This is the wires install cable for the NAND-X. Simply solder the wires to the correct points on the motherboard and plug into the NAND-X. Easy !

Sign in to rate

Our price: $3.45
Market price: $5.95 save 42%
Quantity
Xilinx Parallel Programmer (for Matrix Glitcher and other CPLD's)
SKU: xilinx

Xilinx Parallel Programmer based on the popular Cable III with red and green indicators.

This programmer is an affordable and great way to program your Xilinx chips.
 
Start programming the Xilinx line of products including CPLD's and FPGA's!

Simply plug the programmer into your parallel port on your PC, an the other end to your Xilinx chip.
 

Sign in to rate

Our price: $19.95
No news available at the moment
I have ordered exclusively from modchipcentral for a few years now. Their shipping is excellent and they have fantastic customer service. I don't order from anywhere else now. I recommend them to everyone I know.
Jeff

View All Testimonials

Write Your Own Testimonial
Latest Products RSS Feed
Bestselling Products RSS Feed
Featured Products RSS Feed
Specials RSS Feed