The latest LITE-ON DG16D5S and HITACHI DLN10N 0500/0502* solution from the Matrix Team!

*Hitachi DLN10N 0500/0502 drives are going to be compatible in a few days.

The MTX Freedom PCB is a full replacement for your Liteon DG-16D4S Drives PCB.

Based on the GliGli Hack (a Reset type Glitch Hack), it works by sending precisely timed pulses to the console’s processor until the booting of unsigned code is successful. Once this has been achieved, XeLL, the Xenon Linux Loader is booted.

It works on Phat versions of the X360
(except Xenon motherboard) regardless of the Kernel version

Great for Glitching Phat consoles! Get the JRP V2 to program the Glitcher!

IN STOCK!  

ONLY fits TRINITY MOTHERBOARDS

We are proud to announce the MATRIX TRIDENT (PSI), the first TRIPLE NAND solution available for Xbox360.

The TRIDENT will transform your console 16 MB NAND in 3 independent 16 MB banks that can be read and write with any available SPI reader/writer solution using software tools like Nandpro 2.0 and Nandpro 3.0.

The trident can work together with any Glitcher solution present in the market.

A flat cable is supplied to directly connect it to the Matrix GLitcher II, for enhanced performances.

It features a quick solder board solution for the Trinity slim  and an external switch with led indicators to quickly choose which one of the THREE banks of NAND to use.

With the Matrix Trident you can assign one bank to the Original NAND, the second bank to boot a dashboard and the third NAND bank to boot Xell or a second dashboard.

New Version of Maximus AVRUSB, the Maximus AVRUSB 1.2 comes with OPTIONAL Case and standard USB plug Atmel AT90USB162 version

The 360 NandFlasher V1.2 from Maximus is one of the latest products from the team which allows you to read and write to the NAND firmware chip for you XB360
 

This tool is a hardware solution to dump and flash the nand of 4GB Corona (a.k.a. Corona v2) motherboard because this kind of console are not compatible with the older nand dumping hardware (USB SPI) on the market.

This device will help to professional installers to do the Firmware reading on the latest Liteon drives (83850V2 & 93450). Its based on the MRA concept and 100% compatible with all Xtractor units, it connects directly on the Xtractor pin port. It came with 2 visual indicators, one for polarity check and other for Vendor Mode.This device release could confuse some people because we just released Litekey. This product no longer comes with the Foam pad.

IN STOCK

 This board is a rebuild board, do you remember having to wire up the traces that you cut at the beginning of the MRA method to read the Liteon Firmware? well, this board can be used to avoid doing that re-wire, while the use of this board IS NOT REQUIRED to use the Vampire, we are sure that the use of this board will simplify the full mod procedure, and it has a couple of extra features like making easy access to the probe spots for the vampire and at the end of the job you can choose route the PIN 101 to the power connector of the drive for future updates without re-open (with an upcoming tool). Simply use the rebuild board from the beginning of the installation and we are sure you will find it useful.

• Enhance your game experience with a full 32 MB Memory card, store all your savegames on one memory!
• Load and save PS2 savegames to and from any PC.
• Share and exchange your savegames with friends and on our community forum!

Metal Gears MG996R – 13Kg-Servo

IN STOCK

MicroUSB Cable for USB NAND programming tools.

Effective for use with the XK3Y, DK Programmer, NAND-X, and even for data/power connection to popular mobile devices with the micro USB port.

IN STOCK 

Comes with 22 I/O breakout solder pads points so you can even do more development with this unit!

With the AT90SUSBKEY not being available and other products not being available, we will be stocking this product for those that will enjoy an ATMEGA AVR USB Dev Kit!

Presenting Minimus, a high quality production grade AVR USB Development Unit that is clean in design, low in cost and readily available to resellers around the globe. There are hundreds of projects available for the AVR USB hobbyist looking for a powerful yet cost effective solution. Works with Open Source LUFA USB firmware library and Open Source LibUSB software library.

The Minimus AVR USB is powered by an Atmel AT90USB162 that is pre-programmed with the bootloader which allows code to be programmed inside the chip without any external programmer, just download the FLIP software from Atmel's web site and load your HEX code. To enter the bootloader mode you should simply press and hold HWB button, then press and release the RST button.

* ATMEL AT90USB162
* 22 Programmable I/O Lines
* 16Kbyte Flash
* 512 Byte SRAM
* 512 byte EEPROM
* 16 MIPS Throughput
* USB 2.0 High Speed
* 5V USB Powered
* 16MHz Quartz Crystal Oscillator Circuit
* Power / Status LED's
* Male USB Connector - No Cable Required
* Access to all IO's
* Easy Program / Update with Atmel FLIP (Flexible In-system Programmer)
* Robust HW/Reset Buttons (Simple Once-Only Operation When Programming)
* Full LUFA Compatability
* Full LibUSB Compatability
* Simple Plug n Play
* High Quality production quality at the famous Xecuter factory.

Here are some development resources for AVR USB Development:

* AVR-USB-162 blink LED demo code (C source and HEX)
* AVR-USB-162 button demo code (C source and HEX)
* AVR-USB-162 frequency generator (C code and HEX)
* AVR-USB-162 mouse demo code C source
* AVR-USB-162 virtual COM port demo code C source
* MyUSB LGPL USB stack from Dean Camera

Also some useful AVR USB Development Websites:

* avrfreaks.net
* fourwalledcubicle.com
* winavr.sourceforge.net
* avrtv.com

* Atmel FLIP Software Drivers - CLICK HERE

Clear case for Minimus AVR / 32

Multi-function Anti-spy Detector K18 Camera GSM Audio Bug Finder GPS Signal Lens RF Tracker

IN STOCK