USB to TTL Serial Cable - Debug / Console Cable for Raspberry PiIN STOCK
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port. The power pin provides the 5V @ 500mA direct from the USB port and the RX/TX pins are 3.3V level for interfacing with the most common 3.3V logic level chipsets.
Also handy for hacking WiFi routers to install alternate OS's, or nearly any other 3.3V logic serial port. This is easier to use than an FTDI cable in many cases because the wires are separated. Note that we call this a "TTL cable" (since that's what they're called) but technically it's CMOS logic. |
47%
|


| Was kind of hesitant on ordering from here at first, then just went with my gut. My product came in the mail yesterday and all looks to be OK with it. Haven't had a chance to try it or anything but wanted to go ahead and say thanks for the fast shipping and answering my questions. Will for sure down the road purchase something else if all goes good once installed. |
| J.B |
| View All Testimonials Write Your Own Testimonial |