Simple conversion kit for all DemoN Phat SB 16MB NAND so you can install to any BB 256/512MB without having to buy a new version DemoN.
Make sure you update DemoN to at least 1.04 firmware
New design from TX: the DemoN Corona QSB CR Upgrade v2 now supporting Corona v1 (4GB NAND) and v3 (16MB NANDs)
Improve your RGH boot times with this professionally manufactured Double Shielded 50Ω (ohm) grounded cable for the CPU_RST point.
The latest LITE-ON DG16D5S and HITACHI DLN10N 0500/0502* solution from the Matrix Team!
*Hitachi DLN10N 0500/0502 drives are going to be compatible in a few days.
The external programmers for fine tuning Matrix Glitcher II performance and optional add-on to the Matrix FREEDOM and FREEDOM LITE PCB.
The MTX Freedom PCB is a full replacement for your Liteon DG-16D4S Drives PCB.
New Product from the Matrix team this is a LTU firmware modded PCB replacement for the DG-16D5S DVD drives found in the Xbox 360 slim model consoles.
A simple yet cost effective way to access your Xbox 360 SLIM DVD drive without opening your console again and again.
This will allow but not limited to:
* It allows you to boot your games stored on HDD and remove the DVD after booting (For using on several consoles with only 1 disc). In order to use the bonus feature, one wire is required to be soldered but its totally optional
Made with simplicity in mind! Plug and play install and never have to open your console again.
Features:
100% Compatible with the following products (but not limited to):
NOTE: WILL NOT WORK WITH HITACHI 0500 OR LITE-ON 1175 DRIVES!!
NOTE: This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity
This tool is a hardware solution to dump and flash the nand of 4GB Corona (a.k.a. Corona v2) motherboard because this kind of console are not compatible with the older nand dumping hardware (USB SPI) on the market.
This item is not and has never been designed to work with ANY other power source other then the XBox 360.
XECUTER Corona Postfix adapter is genius design that you have no trouble to solder the postout pin of CPU. Only takes 2 sec , just “click and enjoy it."
MORE DETAILS TO COME - EXPECTED ARRIVAL JUNE 2013
The v1.1s revision to the previous CR3-DGX v1.0s add-on solution.
MORE DETAILS TO COME - EXPECTED ARRIVAL JUNE 2013
MORE DETAILS TO COME - EXPECTED ARRIVAL JUNE 2013
Xecuter QSB V3 External adapter for Nand-X / JR Programmer. Delivery date and details to be released soon.
Allow dual boot on your XB360 SLIM. Compatible with Squirt 360 and any RGH (i.e. Glitcher / CoolRunner)
The Squirt 360 (CoolRunner + Squirt Programmer) all-in-one Glitch hack!
The all in one JTAG & SPI programmer.
This is the Nand-X QSB Install cable that is included in all Nand-X kits. It is the #4 cable that is noted in all of the Xecuter installation guides.
Perfect for those that have lost or damaged their original cable.
Fits the QSB of both Phat and Slim consoles.
Using input and R&D from their experienced forum members, wehave designed this very nice addon board which improves the signal quality of the CPU_RST line. This addon allows the user to easily select resistor Combos of 1K, 2K and 3.3K, and capacitor combos of 470pF, 560pF and 680pF. These are all of the values that gave the very best performance results (many users reported not being able to glitch at all, to a glitch time of 10 seconds!) . Moreover, the addon can be used on all Xilink CoolRunners and all other Xilink Boards on both Phat and Slim version installs.
Introducing the CR PHAT QSB V3 for JR programmer, NANDX and CR all in one simple QSB.
Xecuter CORONA QSB v3 for JR programmer, NANDX and CR all in one simple QSB
New QSB with built in COM port connecter for the new style Slim Trinity Consoles. Easy to use the NAND-X update cable to run COM Port Monitoring on J-Runner program. This version fits Trinity Motherboards.
These are the cables used in conjunction with the v3 QSB’s to grab the CPU key into J-Runner.
A simple kit from Team Xecuter to enable fast read/write of the Corona 4GB NAND. Simply solder the QSB and connect the SD adapter to your computer. Features: Fast Read/Write of a Corona 4GB model NAND (aka Corona v2)
The latest Corona 4GB RW QSB, these V4 models fit both Corona v2 & v4 boards.
Postfix adapter is genius design that you have no trouble to solder the postout pin of CPU. Only takes 2 sec , just “click and enjoy it."
For those who wish to try the recently released Corona16 code for XC2C64A based CoolRunners, Team TX have designed a clean and simple QSB solution so you can easily upgrade with no mess and no fuss.
It is compatible with all versions of the TX X2C64A CoolRunner and also has adapters for easy plug n play of the NDX, JR Programmer v1 and JR Programmer v2.
The Xecuter CR3-DGX v1.0 is an add-on solution to work on update Corona v3/v4 to recover cpu_key for consoles running kernel 15574 or dashboard 2.0.14719.
Team Xecuter has provided an alternative way to connect the CPU_RST.
Cable attaches directly to CR3 Lite.
The CoolRunner CR3 Lite is the next-gen glitch board from Team Xecuter. Corona RGH 2.0 support, tons of add-ons and more features!
The newest RGH3 add-on for the XBox 360 SLIM Trinity and Corona boards. The newest "Rater" feature eliminates any guess work.
The first release of CR3 Pro is designed for slims only. The full kit includes new POST V2 for complete monitoring and tuning using the new CR3 Pro Rater software is also included (J-R Programmer v2 required )
Note: For Corona v2 (4GB) Nand Read/Write you will need the 4GB RW Kit.
Kit Includes:
These devices are designed primarily to aid or assist in the repair or replacement of defective hardware and also for the use of and development of legal open source software. It does not enable any kind of piracy or have any code or any kind of microchip whatsoever that circumvents any kind of protection. It is a basic circuit of wires and diodes that is all. We do not support nor encourage, if possible, potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity
DEMON PHAT BB 256/512MB WILL BE SHIPPED AS PHAT SB 16MB NAND WITH FREE BB 256/512MB NAND UPGRADE KIT!
DEMON SLIM NOW COMES WITH FREE CORONA QSB UPGRADE FOR V1 & V3!
Xecuter DemoN is the newest DUAL NAND solution for the PHAT XBox 360's as well as the SLIM consoles. CoolRunner, RGH 2.0, and more.
Easily convert a TX DemoN Slim so it can be installed to a Corona motherboard without lots of different wires and difficult soldering.
The new Xecuter J-R programmer has been created to cater to the budget conscious and coded to work hand in hand with the latest version of the J-Runner app.
A third of the size of the Xecuter NAND-X and optimized to run faster than any other USB-SPI based tool (other brands run at 50% of NAND-X speed, the J-R runs at 80%), this nifty tool can fully read/write NAND over SPI and can also program the Xilinx CoolRunner Dev Boards over USB !
Complete with a CoolRunner JTAG cable so you simply plug 'n program without any soldering using the latest J-Runner App (needs to be at least Build 268). Also comes with NAND installation wires that have the connectors that are compatible with the NAND-X QSB boards. If you don't use the QSB's you can simply cut off the connectors and do a normal wires only install.
The J-R programmer is also fully upgradeable and can be programmed using the Xecuter X360USB PRO Update app. Onboard LED's indicate Power and BootLoader mode.
RED LED: Bootloader Mode (Switch to the left)
GREEN LED: J-R Programmer Mode (Switch to the right)
Features:
What's In The Kit:
Download:
Disclaimer:
This device is designed primarily to aid or assist in the repair or replacement of defective hardware. It does not enable any kind of piracy or have any code whatsoever that circumvents any kind of protection. We do not support, nor encourage potential infringements of others intellectual property rights - please do not contact us with any question related to this use as we will not respond. DO NOT use or buy this product if you are looking to perform any illegal activity. Opening your Xbox 360 renders your warranty null and void. You should not attempt to repair your Xbox 360 unless it is no longer under warranty, or else you do NOT intend to use your warranty. XCONSOLES.COM is not responsible for any damage done to your Xbox 360 or any other devices that you may use with the J-R Programmer. Please do not attempt to repair your Xbox 360 unless you have experience working with computer hardware.
Xbox & Xbox 360 are registered trademarks by Microsoft Corporation. No affiliation between the Team Xecuter or Xconsoles.com and Microsoft Corporation exists or is implied.
QSB for JR Programmer v1.0 - upgrade to v1.1 speed boost.
A re-designed version of the successful J-R Programmer released from Team Xecuter.
The new J-R Programmer v2 now includes full POST monitoring for the CR3 Pro rater feature. Speed enhancements are also included that puts it within 30 seconds of the high speed NAND-X.
The newest Unlocked DVD PCB running LT Ultimate FW for all slims is here!
The Xecuter Nand-X V3.0 & JTAG Kit is the latest tool used for the JTAG mod or key retrieval on Xbox 360.
After several months of development, Team Xecuter has launched their newest exploit for XBox 360 PHAT consoles: the TX R-JTAG v1.0 - Starter Kit!


| Man I love these guys, this is one of the first place I ever order from with such good, no, superb! customer support. Product shipped and was well protected in double bubble wrap. The shipping was fast as well considering it had to travel all the way to Florida which took 5 days! Love this site and will always be back! |
| Lo |
| View All Testimonials Write Your Own Testimonial |