Is your old Hitachi/Samsung/Benq System on its last legs ? Overheating and Freezing Issues ? 2 x Red Lights Crashing Your System ? THE ULTIMATE SOLUTION IS HERE !!!!!! 

The Xecuter xDrive Plus (inc xFan) is the next level in Xbox 360 cooling, stability and easy external firmware upgrading. The famous Team Xecuter have once again developed a solution to a very common problem on the older Xbox 360 consoles - the dreaded 2 x Red Lights and Overheating / Game Freezing issues.

Using the same technology as used on the original xDrive, you now have the ability to remove your internal 360 DVD ROM and have it connected to your 360 externally. The space where your internal DVD used to be is then replaced by an entire cooling system - as this is one of the main sources of heat inside the Xbox and it resides directly over the GPU (which is the main causes of overheating issues / game freezing / graphics corruption / rrod) - this now gives your Xbox a drop in temperature that is unprecedented in any of the cooling kits or fans that have ever been released before. In tests the GPU alone dropped as much as 20 Degrees Celsius with the xFan enabled !!! The entire system is completely custom designed from the ground up. It has been extensively tested by many users on the Xecuter forums and has shown to be a resounding success. One user reported that his console would give 2 Red Lights (Over heated) after 5 minutes even with the RROD Repair Kit installed and also with a Whisper Legacy Fan. When he installed the xDrive Plus and xFan - he tested the system overnight and finally turned it off manually after it had been running game demos for 20 hours straight !!! AMAZING RESULTS !!!

The Xecuter xDRIVE is an external unit enabling you to switch between an internal and an external DVD drive on your Xbox 360 - the xDRIVE PLUS and xFAN is a radical design in 360 Cooling - dropping your temps as much as 20 degrees!

PCI Sata controller. - Chipset VT6421A - 2x SATA and IDE ports! (Some have E-SATA some don'T, but E-ATA can not be used for reading the console drive)

 

Preflashed USB SPI Nand Flashers based on Darkstar's Design.
Compatible with NandPro2.0b
Jumper to Enable Bootloader mode to allow updating of the PIC
Power LED
Removable jumper harness in case you want to leave it installed in your 360
Will also come with a CD containing the drivers and software.

New Version of Maximus AVRUSB, the Maximus AVRUSB 1.2 comes with OPTIONAL Case and standard USB plug Atmel AT90USB162 version

Xilinx Parallel Programmer based on the popular Cable III with red and green indicators.

This programmer is an affordable and great way to program your Xilinx chips.
 
Start programming the Xilinx line of products including CPLD's and FPGA's!

Simply plug the programmer into your parallel port on your PC, an the other end to your Xilinx chip.
 

This device will help to professional installers to do the Firmware reading on the latest Liteon drives (83850V2 & 93450). Its based on the MRA concept and 100% compatible with all Xtractor units, it connects directly on the Xtractor pin port. It came with 2 visual indicators, one for polarity check and other for Vendor Mode.This device release could confuse some people because we just released Litekey. This product no longer comes with the Foam pad.

IN STOCK

 This board is a rebuild board, do you remember having to wire up the traces that you cut at the beginning of the MRA method to read the Liteon Firmware? well, this board can be used to avoid doing that re-wire, while the use of this board IS NOT REQUIRED to use the Vampire, we are sure that the use of this board will simplify the full mod procedure, and it has a couple of extra features like making easy access to the probe spots for the vampire and at the end of the job you can choose route the PIN 101 to the power connector of the drive for future updates without re-open (with an upcoming tool). Simply use the rebuild board from the beginning of the installation and we are sure you will find it useful.